On Tue, Mar 15, 2011 at 03:50:29PM +0800, Shawn Guo wrote:
> On Tue, Mar 15, 2011 at 01:41:01AM -0600, Grant Likely wrote:
> > On Tue, Mar 08, 2011 at 11:56:34AM +0800, Shawn Guo wrote:
> > > On Mon, Mar 07, 2011 at 10:53:37AM -0700, Grant Likely wrote:
> > > > On Mon, Mar 7, 2011 at 9:22 AM, Shawn Guo <shawn....@linaro.org> wrote:
> > > > > The 'rate' is added for fixed-clock support, while 'pll_base' is for
> > > > > pll clock. These two particular type of clocks are supposed to be
> > > > > gracefully supported by the common clk api when it gets ready.
> > > >
> > > > How does the current imx clock code handle fixed and pll clocks?
> > >
> > > For fixed-clock, the current code gets several variables holding the
> > > rate and then return the rate from several get_rate functions.
> > >
> > > static unsigned long external_high_reference, external_low_reference;
> > > static unsigned long oscillator_reference, ckih2_reference;
> > >
> > > static unsigned long get_high_reference_clock_rate(struct clk *clk)
> > > {
> > > return external_high_reference;
> > > }
> > >
> > > static unsigned long get_low_reference_clock_rate(struct clk *clk)
> > > {
> > > return external_low_reference;
> > > }
> > >
> > > static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
> > > {
> > > return oscillator_reference;
> > > }
> > >
> > > static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
> > > {
> > > return ckih2_reference;
> > > }
> > >
> > > With this new rate member added, all these can be consolidated into one.
> > >
> > > For base address of pll, the current code uses the reference to clocks
> > > statically defined to know which pll is the one.
> > >
> > > static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
> > > {
> > > #ifdef CONFIG_OF
> > > return pll->pll_base;
> > > #else
> > > if (pll == &pll1_main_clk)
> > > return MX51_DPLL1_BASE;
> > > else if (pll == &pll2_sw_clk)
> > > return MX51_DPLL2_BASE;
> > > else if (pll == &pll3_sw_clk)
> > > return MX51_DPLL3_BASE;
> > > else
> > > BUG();
> > >
> > > return NULL;
> > > #endif
> >
> > Be careful about stuff like this. Remember that enabling CONFIG_OF
> > must *not break* board support that does not use the device tree. The
> > above #ifdef block will break existing users.
> >
> Though the code has been killed in the latest version I just sent
> yesterday I sent last night, I do not understand how it will break
> the existing users. The existing code is:
>
> static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
> {
> if (pll == &pll1_main_clk)
> return MX51_DPLL1_BASE;
> else if (pll == &pll2_sw_clk)
> return MX51_DPLL2_BASE;
> else if (pll == &pll3_sw_clk)
> return MX51_DPLL3_BASE;
> else
> BUG();
>
> return NULL;
> }
What you wrote wrapped the current implementation with #ifdef
CONFIG_OF ... #else [existing code] #endif. That says to me that when
CONFIG_OF is enabled, the old code gets compiled out, which means the
function no longer works on non-dt platforms.
The goal is to support both dt and non-dt machines with a single
kernel image.
g.
>
> --
> Regards,
> Shawn
>
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
