Hi, Kurt,
On Fri, Apr 1, 2011 at 11:20 PM, Kurt Taylor <kurt.tay...@linaro.org> wrote:
> Hi everyone,
>
> I am trying to assemble a reference for the sound device specifics for all
> the platforms. The catch is that I don't have all the dev platforms
> available to me.
>
> Here is where you can help! I have Panda and Beagle C4. I need everything
> else. If you have access to other platform(s), please do the following and
> email the output to me.
>
> With a Linaro image or Ubuntu image (an image with with pulseaudio
> installed), run the following: "pacmd list-sinks" and email it to me. You
> will get an output that resembles this:
>
Here is what I get:
jason@jason-laptop:~$ dmesg | grep Machine
[ 0.000000] Machine: Genesi Efika MX (Smartbook)
jason@jason-laptop:~$ cat /etc/issue
Ubuntu 10.10 \n \l
jason@jason-laptop:~$ pacmd list-sinks
Welcome to PulseAudio! Use "help" for usage information.
>>> 1 sink(s) available.
* index: 0
name: <alsa_output.platform-soc-audio.2.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9009
volume: 0: 82% 1: 82%
0: -5.17 dB 1: -5.17 dB
balance 0.00
base volume: 100%
0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 139.32 ms
card: 0 <alsa_card.platform-soc-audio.2>
module: 4
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = ""
alsa.id = "SGTL5000 SGTL5000-0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "imx-3stack"
alsa.long_card_name = "imx-3stack (SGTL5000)"
device.bus_path = "platform-soc-audio.2"
sysfs.path = "/devices/platform/soc-audio.2/sound/card0"
device.string = "hw:0"
device.buffering.buffer_size = "24576"
device.buffering.fragment_size = "6144"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "imx-3stack Analog Stereo"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card"
ports:
analog-output: Analog Output (priority 9900)
analog-output-headphones: Analog Headphones (priority 9000)
active port: <analog-output>
>
> Thanks in advance!
>
> Kurt Taylor (irc krtaylor)
>
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>
>
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
