Zach, Unfortunately CCS Licenses are not free yet.
To get a license you can either buy an XDS100 and use the free license that works with that or you can buy a CCS license from TI or a distributor. There is also a 90 day eval license that you can get here: http://processors.wiki.ti.com/index.php/FAQ_-_CCSv4#Q:_Where_is_the_link_to_the_90_day_eval_license.3F The licenses are v4 but will work with CCSv5.0 and CCSv5.1 betas. The link for downloading the CCS install is at: http://processors.wiki.ti.com/index.php/Category:Code_Composer_Studio_v5 You will want the 5.1 M4 release. Keep in mind the CCSv5.x releases are pre-production releases and are not recommended for production environments. Regards, Doug Deao Texas Instruments -----Original Message----- From: Zach Pfeffer [mailto:zach.pfef...@linaro.org] Sent: Wednesday, May 04, 2011 9:20 PM To: Deao, Douglas Cc: Loïc Minier; linaro-dev@lists.linaro.org Subject: Re: STM at UDS-Budapest Thanks Doug. Would you send a link and any licensing info (free on Linux would be great!). On 4 May 2011 17:25, Deao, Douglas <d-d...@ti.com> wrote: > Zach, > > I would sign up for your session but I am flying out Thursday to make a > customer meeting Friday. > > I am not real familiar with the Panda or Beagle boards, and have never used > one. I took a look at the Panda board schematics and it's using the standard > 14-pin JTAG connector, so all the standard CCS debug capabilities should be > supported. > > I believe the Beagle board also uses the standard 14-pin JTAG connector. > > Here are a couple of links for debugging with the Beagle board: > > http://processors.wiki.ti.com/index.php/Debugging_Beagle_with_an_XDS100 > http://processors.wiki.ti.com/index.php/Debug_Access_Port_%28DAP%29 > > CCS will be supported on Linux. I have sent a request into our CCS Team to > confirm the state of Linux support. > > Regards, > Doug > > -----Original Message----- > From: Zach Pfeffer [mailto:zach.pfef...@linaro.org] > Sent: Wednesday, May 04, 2011 1:11 PM > To: Loïc Minier > Cc: Deao, Douglas; linaro-dev@lists.linaro.org > Subject: Re: STM at UDS-Budapest > > Would you guys mind signing up for: > > https://blueprints.launchpad.net/linaro-android/+spec/linaro-android-o-jtag > > I think this topic would fit in well with that. Would you also mind > sending some info about JTAG support for Panada and Beagle and when > and if CCS will be supported on Linux? > > -Zach > > On 3 May 2011 06:37, Loïc Minier <loic.min...@linaro.org> wrote: >> Hi >> >> The attachment which was too big for the mailing-list is at: >> http://people.linaro.org/~lool/STMLinuxDriverWhitePaper_Rev0%202S.pdf >> >> Cheers >> -- >> Loïc Minier >> >> _______________________________________________ >> linaro-dev mailing list >> linaro-dev@lists.linaro.org >> http://lists.linaro.org/mailman/listinfo/linaro-dev >> > _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
