On my Panda board, the focused build boots up (shell reached and ps shows system processes running) but does not show anything on a DVI monitor (screen remains blank)
The enablement build fails to boot up, kernel saying "DEADLOCK" ---- [ 9.146179] ---- lock([ 9.147369] lock(psPVRSRVMutexpsPVRSRVMutex); ); lock([ 9.149963] lock(psPVRSRVMutexpsPVRSRVMutex); ); *** DEADLOCK *** [ 9.159881] [ 9.159881] *** DEADLOCK *** [ 9.159881] May be due to missing lock nesting notation On Mon, Jul 18, 2011 at 7:08 PM, Zach Pfeffer <zach.pfef...@linaro.org>wrote: > Fellow PandaBoard enthusiasts, take our latest 3.0 kernel based, > Linaro GCC 4.5 upstream and enablement preview builds for a ride... > > Upstream Focused Build: > > After plugging in an SD card (listed here as /dev/sdc) run the > following commands: > > wget --no-check-certificate > > https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-release/3/artifact/build/out/target/product/pandaboard/boot.tar.bz2 > wget --no-check-certificate > > https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-release/3/artifact/build/out/target/product/pandaboard/system.tar.bz2 > wget --no-check-certificate > > https://android-build.linaro.org/jenkins/job/linaro-android_panda-11.07-release/3/artifact/build/out/target/product/pandaboard/userdata.tar.bz2 > bzr branch lp:linaro-image-tools > ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev > panda --system system.tar.bz2 --userdata userdata.tar.bz2 --boot > boot.tar.bz2 > > Insert the SD card into your PandaBoard, a monitor into the DVI port > and you'll be up and running in 640x480p@60Hz with software emulated > 3-D. > > Build page at: > > https://android-build.linaro.org/builds/~linaro-android/panda-11.07-release/#build=3 > > Enablement Build: > > After plugging in an SD card (list here as /dev/sdc) run the following > commands: > > wget --no-check-certificate > > https://android-build.linaro.org/jenkins/job/linaro-android_leb-panda-11.07-release/2/artifact/build/out/target/product/pandaboard/boot.tar.bz2 > wget --no-check-certificate > > https://android-build.linaro.org/jenkins/job/linaro-android_leb-panda-11.07-release/2/artifact/build/out/target/product/pandaboard/system.tar.bz2 > wget --no-check-certificate > > https://android-build.linaro.org/jenkins/job/linaro-android_leb-panda-11.07-release/2/artifact/build/out/target/product/pandaboard/userdata.tar.bz2 > bzr branch lp:linaro-image-tools > ./linaro-image-tools/linaro-android-media-create --mmc /dev/sdc --dev > panda --system system.tar.bz2 --userdata userdata.tar.bz2 --boot > boot.tar.bz2 > > Insert the SD card into your PandaBoard, a monitor into the HDMI port > and you'll be up and running in 1920x1080p60Hz with full 3-D > acceleration! > > Build page at > > https://android-build.linaro.org/builds/~linaro-android/leb-panda-11.07-release/#build=2 > > Try one... or both! This is a preview, but I couldn't wait to share > it. These can also be built from source. Take a look at: > > https://wiki.linaro.org/Platform/Android/GetSource > https://wiki.linaro.org/Platform/Android/BuildSource > > As always send inquirys to linaro-dev@lists.linaro.org or me, > zach.pfef...@linaro.org. We'd also love contributions and will be > setting up Gerrit soon to help facilitate Android collaboration. > > Enjoy! > > -Zach > -- Andy Tai, a...@atai.org, Skype: licheng.tai Year 2011 民國100年 自動的精神力是信仰與覺悟 自動的行為力是勞動與技能
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
