Please split the two patches.
1. Add TMU Kconfig
2. board support

On Wed, Oct 26, 2011 at 8:36 PM, Amit Daniel Kachhap
<amit.kach...@linaro.org> wrote:
> Signed-off-by: Amit Daniel Kachhap <amit.kach...@linaro.org>
> ---
>  arch/arm/mach-exynos4/Kconfig       |    5 +++++
>  arch/arm/mach-exynos4/mach-origen.c |   10 ++++++++++
>  2 files changed, 15 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index cf467b5..786fdb7 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -108,6 +108,11 @@ config EXYNOS4_SETUP_USB_PHY
>        help
>          Common setup code for USB PHY controller
>
> +config EXYNOS4_THERMAL
> +       bool
> +       depends on SENSORS_EXYNOS4_TMU
> +       default y
> +
>  # machine support
>
>  menu "EXYNOS4 Machines"
> diff --git a/arch/arm/mach-exynos4/mach-origen.c 
> b/arch/arm/mach-exynos4/mach-origen.c
> index ed59f86..089b0e3 100644
> --- a/arch/arm/mach-exynos4/mach-origen.c
> +++ b/arch/arm/mach-exynos4/mach-origen.c
> @@ -24,6 +24,10 @@
>  #include <plat/devs.h>
>  #include <plat/sdhci.h>
>  #include <plat/iic.h>
> +#if defined(CONFIG_EXYNOS4_THERMAL)
Do you this ifdef?
> +#include <mach/exynos4-tmu.h>
> +#include <mach/regs-tmu.h>
> +#endif
>
>  #include <mach/map.h>
>
> @@ -83,6 +87,9 @@ static struct platform_device *origen_devices[] __initdata 
> = {
>        &s3c_device_hsmmc2,
>        &s3c_device_rtc,
>        &s3c_device_wdt,
> +#ifdef CONFIG_EXYNOS4_THERMAL
If you select the this config at origen kconfig. it's not needed.
> +       &exynos4_device_tmu,
> +#endif
>  };
>
>  static void __init origen_map_io(void)
> @@ -95,6 +102,9 @@ static void __init origen_map_io(void)
>  static void __init origen_machine_init(void)
>  {
>        s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
> +#ifdef CONFIG_EXYNOS4_THERMAL
> +       exynos4_tmu_set_platdata(NULL);
> +#endif
you can use it exynos4_tmu_set_platdata by adding proper ifdef at
header file instead of C file
>        platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
>  }
>
> --
> 1.7.1
>
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
>

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to