Hi Rajendra,
Just one minor comment if you plan to repost.
On 12/14/2011 12:55 PM, Rajendra Nayak wrote:
Pass minimal data needed for console boot, from dt, for
OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the
static initialization from generic board file.
Acked-by: Rob Herring<[email protected]>
Signed-off-by: Rajendra Nayak<[email protected]>
Tested-by: Benoit Cousson <[email protected]>
arch/arm/boot/dts/omap3.dtsi | 31 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4.dtsi | 28 ++++++++++++++++++++++++++++
arch/arm/mach-omap2/board-generic.c | 1 -
3 files changed, 59 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d202bb5..216c331 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -13,6 +13,13 @@
/ {
compatible = "ti,omap3430", "ti,omap3";
+ aliases {
+ serial0 =&uart1;
+ serial1 =&uart2;
+ serial2 =&uart3;
+ serial3 =&uart4;
+ };
+
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
@@ -59,5 +66,29 @@
interrupt-controller;
#interrupt-cells =<1>;
};
+
+ uart1: serial@0x4806a000 {
Could you get rid of the 0x prefix for consistency?
This is applicable for the omap4.dtsi as well.
Thanks,
Benoit
_______________________________________________
linaro-dev mailing list
[email protected]
http://lists.linaro.org/mailman/listinfo/linaro-dev
