Thanks Eric, I'll get these into 2012.1. On Tue, Jan 10, 2012 at 2:09 AM, Eric Miao <eric.m...@linaro.org> wrote: > The following changes since commit cba9a894fdb1cb49b60fcd1d1d6919cbd7995dd5: > > Prepare v2011.12 (2011-12-23 20:25:35 +0100) > > are available in the git repository at: > git://git.linaro.org/bsp/freescale/u-boot-linaro.git lt-imx6 > > Dirk Behme (1): > i.mx: i.mx6q: add the initial support for i.mx6q Sabre Lite board > > Eric Miao (2): > i.mx6q: mx6qsabrelite: Change default mmcdev and boot command > net/eth.c: fix eth_write_hwaddr() to use dev->enetaddr as fall back > > Fabio Estevam (1): > sdhc_boot: Introduce CONFIG_FSL_FIXED_MMC_LOCATION option > > Jason Chen (1): > i.mx: i.mx6q: add aisp tz init for Off-Platform Peripheral > > Jason Liu (5): > i.mx: fsl_esdhc: add the i.mx6q support > i.mx: i.mx6q: Add the enet clock function > fec: add the i.mx6q enet driver support > i.mx6q: arm2: Add the enet function support > i.mx6q: mx6qsabrelite: Add the ethernet function support > > MAINTAINERS | 1 + > arch/arm/cpu/armv7/mx6/clock.c | 5 + > arch/arm/cpu/armv7/mx6/soc.c | 10 + > board/freescale/common/Makefile | 2 +- > board/freescale/common/sdhc_boot.c | 2 + > board/freescale/mx6qarm2/mx6qarm2.c | 90 +++++++++ > board/freescale/mx6qsabrelite/Makefile | 42 ++++ > board/freescale/mx6qsabrelite/imximage.cfg | 170 ++++++++++++++++ > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 259 > +++++++++++++++++++++++++ > boards.cfg | 1 + > drivers/mmc/fsl_esdhc.c | 12 +- > drivers/net/fec_mxc.c | 10 + > drivers/net/fec_mxc.h | 7 +- > include/configs/MPC8536DS.h | 1 + > include/configs/P1010RDB.h | 1 + > include/configs/P1_P2_RDB.h | 1 + > include/configs/P2020COME.h | 1 + > include/configs/P2020DS.h | 1 + > include/configs/P2041RDB.h | 1 + > include/configs/corenet_ds.h | 1 + > include/configs/mx6qarm2.h | 13 +- > include/configs/mx6qsabrelite.h | 171 ++++++++++++++++ > include/configs/p1_p2_rdb_pc.h | 1 + > net/eth.c | 3 +- > 24 files changed, 797 insertions(+), 9 deletions(-) > create mode 100644 board/freescale/mx6qsabrelite/Makefile > create mode 100644 board/freescale/mx6qsabrelite/imximage.cfg > create mode 100644 board/freescale/mx6qsabrelite/mx6qsabrelite.c > create mode 100644 include/configs/mx6qsabrelite.h
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
