Hi, Linas On 2 May 2012 19:23, Linas Chang <shch...@marvell.com> wrote:
> Hi YongQin**** > > ** ** > > I got it form below**** > > ** ** > > http://www.igloocommunity.org/download/android/ics/images/2012.03/**** > > ** ** > > I also notices above link since has new ics image at 4/26 release , could > I used this one or I need to download image from your below link**** > > ** > Could you try as following: netcfg #confirm if there is the eth0 interface netcfg eth0 up #bring the eth0 interface up netcfg eth0 dhcp #get dhcp ip for eth0 interface ifconfig #confirm if the eth0 interface has gotten an ip I am sorry, I don't know which one is right for you. But if the above commands also not works for you, maybe you can have a try with the images downloaded from https://android-build.linaro.org/. Or you can report this problem to the igloocommunity<http://www.igloocommunity.org/download/android/ics/images/2012.03/>, they also have a mailing list and irc channel. you can find the information from here http://igloocommunity.org/support/Main_Page Thanks, Yongqin Liu ** > > ** ** > > Linas**** > > ** ** > > *From:* YongQin Liu [mailto:yongqin....@linaro.org] > *Sent:* Wednesday, May 02, 2012 7:17 PM > *To:* linaro-dev > *Cc:* Linas Chang > *Subject:* Fwd: adb question**** > > ** ** > > Hi, *Linas* **** > > ** ** > > Sorry, one thing I want to make sure is that you are using the android > images from https://android-build.linaro.org/?**** > > ** ** > > Hi, All**** > > ** ** > > If you have met such problems as below, please give your suggestion.**** > > ** ** > > Thanks,**** > > Yongqin Liu**** > > ---------- Forwarded message ---------- > From: *Linas Chang* <shch...@marvell.com> > Date: 2 May 2012 15:46 > Subject: RE: adb question > To: YongQin Liu <yongqin....@linaro.org> > > **** > > Hi YongQin**** > > **** > > I test more times , I found the case since be changed**** > > **** > > I found device hard to get ip , so I install a dhcp server at my computer > , and ethnet connect to snowboard directly**** > > **** > > After device boot up , through your command “netcfg eth0 dhcp” ,I still > can’t obtain IP **** > > **** > > But I found strange thing , even console show up “dhcp time out” ,but the > log for dhcp server at my computer told me , it has assign a IP to > snowboard , even snowboard console show dhcp time out**** > > **** > > At this case , I used fixed IP that same as my computer dhcp log said for > snow board , I could ping device form host , and adb look ok ,connect and > push also work**** > > **** > > But I need to connect to my server to do further thing , so I can’t used > above method to fixed adb issue ,and if I connect to server I hard to know > which IP server assign to snow board**** > > **** > > **** > > So do you have any idea why dhcp server assign IP to snowboard , but > snowboard console still told me it can’t obtain IP from DHCP server**** > > **** > > **** > > **** > > Linas**** > > **** > > *From:* YongQin Liu [mailto:yongqin....@linaro.org] > *Sent:* Tuesday, April 24, 2012 11:54 AM > *To:* Linas Chang > *Subject:* Re: adb question**** > > **** > > Hi, Linas**** > > On 24 April 2012 11:29, Linas Chang <shch...@marvell.com> wrote:**** > > Thanks for your help**** > > **** > > Currently , I could do the adb shell follow your instruction**** > > **** > > But I still can’t do adb push**** > > Could you paste your error information?**** > > From this sentence, I think we can't see why it can't do the adb push > command.**** > > **** > > And about the question below, I am sorry I can't give you any help.**** > > You can wait other members for help.**** > > **** > > Thanks,**** > > Yongqin Liu **** > > **** > > And I notice there are code dump during system boot up , I don’t build the > linux BSP and android , I used pre-build binary , the code dump as below** > ** > > **** > > Another question , I found your product spec said , snowboard need 5V > power , could you let me know which amp is device needed**** > > **** > > 9.562652] ------------[ cut here ]------------**** > > [ 9.567291] WARNING: at > /mnt/jenkins/workspace/linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release/build/kernel/kernel/softirq.c:159 > local_bh_enable_ip+0xa0/0xd4()**** > > [ 9.583129] Modules linked in: gator(O)**** > > [ 9.586975] [<c001d8a0>] (unwind_backtrace+0x0/0x144) from [<c05d9e2c>] > (dump_stack+0x20/0x24)**** > > [ 9.595611] [<c05d9e2c>] (dump_stack+0x20/0x24) from [<c003378c>] > (warn_slowpath_common+0x5c/0x74)**** > > [ 9.604553] [<c003378c>] (warn_slowpath_common+0x5c/0x74) from > [<c00337d0>] (warn_slowpath_null+0x2c/0x34)**** > > [ 9.614227] [<c00337d0>] (warn_slowpath_null+0x2c/0x34) from > [<c003af64>] (local_bh_enable_ip+0xa0/0xd4)**** > > [ 9.623687] [<c003af64>] (local_bh_enable_ip+0xa0/0xd4) from > [<c05e1f58>] (_raw_spin_unlock_bh+0x48/0x4c)**** > > [ 9.633270] [<c05e1f58>] (_raw_spin_unlock_bh+0x48/0x4c) from > [<c040b61c>] (cg2900_hu_dequeue+0x7c/0x244)**** > > [ 9.642852] [<c040b61c>] (cg2900_hu_dequeue+0x7c/0x244) from > [<c040db10>] (cg2900_hci_uart_tx_wakeup+0x124/0x180)**** > > [ 9.653106] [<c040db10>] (cg2900_hci_uart_tx_wakeup+0x124/0x180) from > [<c040dbcc>] (hci_uart_tty_wakeup+0x60/0x7c)**** > > [ 9.663452] [<c040dbcc>] (hci_uart_tty_wakeup+0x60/0x7c) from > [<c028bd0c>] (tty_wakeup+0x60/0x6c)**** > > [ 9.672332] [<c028bd0c>] (tty_wakeup+0x60/0x6c) from [<c02a71a8>] > (uart_write_wakeup+0x28/0x30)**** > > [ 9.681030] [<c02a71a8>] (uart_write_wakeup+0x28/0x30) from > [<c02aa1ac>] (pl011_int+0x518/0x5b0)**** > > [ 9.689819] [<c02aa1ac>] (pl011_int+0x518/0x5b0) from [<c00946d4>] > (handle_irq_event_percpu+0x78/0x2e0)**** > > [ 9.699218] [<c00946d4>] (handle_irq_event_percpu+0x78/0x2e0) from > [<c0094988>] (handle_irq_event+0x4c/0x6c)**** > > [ 9.709045] [<c0094988>] (handle_irq_event+0x4c/0x6c) from [<c00978cc>] > (handle_fasteoi_irq+0xa8/0x168)**** > > [ 9.718444] [<c00978cc>] (handle_fasteoi_irq+0xa8/0x168) from > [<c0093e70>] (generic_handle_irq+0x3c/0x50)**** > > [ 9.728027] [<c0093e70>] (generic_handle_irq+0x3c/0x50) from > [<c0016058>] (handle_IRQ+0x5c/0xbc)**** > > [ 9.736816] [<c0016058>] (handle_IRQ+0x5c/0xbc) from [<c0008544>] > (gic_handle_irq+0x34/0xb8)**** > > [ 9.745239] [<c0008544>] (gic_handle_irq+0x34/0xb8) from [<c0014c80>] > (__irq_svc+0x40/0x70)**** > > [ 9.753601] Exception stack(0xed1d5d68 to 0xed1d5db0)**** > > [ 9.758636] 5d60: c090a880 00000000 ed1d5e6c c0029324 > fffffffd 00000000**** > > [ 9.766815] 5d80: 00000000 ed1d5e6c 00000000 00000000 00000000 ed1d5dd4 > c090a880 ed1d5db0**** > > [ 9.774993] 5da0: c005afa4 c0029324 20000013 ffffffff**** > > [ 9.780059] [<c0014c80>] (__irq_svc+0x40/0x70) from [<c0029324>] > (qos_delayed_cpufreq_notifier+0x0/0xb8)**** > > [ 9.789550] [<c0029324>] (qos_delayed_cpufreq_notifier+0x0/0xb8) from > [<c005b168>] (__srcu_notifier_call_chain+0x54/0x70)**** > > [ 9.800506] [<c005b168>] (__srcu_notifier_call_chain+0x54/0x70) from > [<c005b1ac>] (srcu_notifier_call_chain+0x28/0x30)**** > > [ 9.811187] [<c005b1ac>] (srcu_notifier_call_chain+0x28/0x30) from > [<c03cf124>] (cpufreq_notify_transition+0xc4/0x2dc)**** > > [ 9.821899] [<c03cf124>] (cpufreq_notify_transition+0xc4/0x2dc) from > [<c03d43a0>] (dbx500_cpufreq_target+0x9c/0x150)**** > > [ 9.832427] [<c03d43a0>] (dbx500_cpufreq_target+0x9c/0x150) from > [<c03ce29c>] (__cpufreq_driver_target+0x88/0xc4)**** > > [ 9.842681] [<c03ce29c>] (__cpufreq_driver_target+0x88/0xc4) from > [<c03d29b8>] (do_dbs_timer+0x498/0x4b0)**** > > [ 9.852264] [<c03d29b8>] (do_dbs_timer+0x498/0x4b0) from [<c004f170>] > (process_one_work+0x138/0x4ac)**** > > [ 9.861389] [<c004f170>] (process_one_work+0x138/0x4ac) from > [<c004f88c>] (worker_thread+0x188/0x374)**** > > [ 9.870605] [<c004f88c>] (worker_thread+0x188/0x374) from [<c0054b64>] > (kthread+0x98/0xa4)**** > > [ 9.878875] [<c0054b64>] (kthread+0x98/0xa4) from [<c0016318>] > (kernel_thread_exit+0x0/0x8)**** > > [ 9.887237] ---[ end trace c0fe18d58f2dc323 ]---**** > > **** > > **** > > Linas**** > > **** > > *From:* YongQin Liu [mailto:yongqin....@linaro.org] > *Sent:* Monday, April 23, 2012 7:48 PM > *To:* Linas Chang > *Cc:* linaro-andr...@lists.linaro.org > *Subject:* Re: adb question**** > > **** > > Hi, Linas**** > > **** > > Maybe you can try following commands:**** > > **** > > > ---------------------------------------------------------------------------------------------- > **** > > netcfg eth0 dhcp #get your eth network up**** > > ifconfig eth0 #get your board IP **** > > echo 0>/sys/class/android_usb/android0/enable #enable adb via IP**** > > setprop service.adb.tcp.port 5555 #set the adb > connection port**** > > stop adbd # restart > adbd**** > > start adbd**** > > > ---------------------------------------------------------------------------------------------- > **** > > **** > > If the above commands work for you, please let me know.**** > > I will update the wiki then.**** > > **** > > Thanks,**** > > Yongqin Liu**** > > **** > > On 23 April 2012 19:06, Linas Chang <shch...@marvell.com> wrote:**** > > Dear linaro-support team**** > > **** > > Currently , I used > linaro-android_snowball-ics-gcc46-igloo-stable-blob-12.03-release at your > snowboard**** > > **** > > I face a question , that is**** > > **** > > When I used adb , follow below command form your web-site**** > > **** > > - ADB only works over IP > In the console type:**** > > · stop adbd**** > > · setprop service.adb.tcp.port 6565**** > > · start adbd**** > > · ifconfig eth0 # to get boardsIP**** > > **** > > after my host connect to device**** > > , I try to used adb push –s <device IP>:6565 <my txt file> /data or adb –s > <device ip>:6565 shell form host**** > > Both fail ,and I didn’t see any error meaage , it look like hang after I > type above adb command**** > > **** > > Do you have any suggestion about this**** > > **** > > Thanks for your help**** > > **** > > Linas**** > > **** > > **** > > **** > > > _______________________________________________ > linaro-android mailing list > linaro-andr...@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-android**** > > **** > > **** > > ** ** >
_______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
