On 10/25/2012 08:30 AM, Rajanikanth H.V wrote: > From: "Rajanikanth H.V" <rajanikanth...@stericsson.com> > > This patch adds device tree support for > battery-temperature-monitor driver > > Signed-off-by: Rajanikanth H.V <rajanikanth...@stericsson.com> > --- > Documentation/devicetree/bindings/mfd/ab8500.txt | 6 ++ > .../bindings/power_supply/ab8500/btemp.txt | 16 +++++ > arch/arm/boot/dts/dbx5x0.dtsi | 5 ++ > drivers/mfd/ab8500-core.c | 5 ++ > drivers/power/Kconfig | 6 -- > drivers/power/ab8500_bmdata.c | 4 +- > drivers/power/ab8500_btemp.c | 66 > ++++++++++++-------- > 7 files changed, 73 insertions(+), 35 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt > > diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt > b/Documentation/devicetree/bindings/mfd/ab8500.txt > index 6ca8d81..179c802 100644 > --- a/Documentation/devicetree/bindings/mfd/ab8500.txt > +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt > @@ -30,6 +30,12 @@ ab8500-fg : : > vddadc : Fuel Gauge > : LOW_BAT_F : : LOW threshold > battery voltage > : CC_INT_CALIB : : Coulomb > Counter Internal Calibration > : CCEOC : : Coulomb > Counter End of Conversion > +ab8500-btemp : : vtvout : Battery > Temperature > + : BAT_CTRL_INDB : : Battery > Removal Indicator > + : BTEMP_LOW : : Btemp < > BtempLow, if battery temperature is lower than -10°C > + : BTEMP_HIGH : : BtempLow < > Btemp < BtempMedium,if battery temperature is between -10 and 0°C > + : BTEMP_LOW_MEDIUM : : BtempMedium < > Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp > + : BTEMP_MEDIUM_HIGH : : Btemp > > BtempHigh, if battery temperature is higher than “MaxTemp”
BTEMP_HIGH, BTEMP_LOW_MEDIUM and BTEMP_MEDIUM_HIGH are in the wrong order and don't correspond to their description. -- Francesco _______________________________________________ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
