On 11/15/2012 01:51 PM, Zhang Rui wrote:
> On Thu, 2012-11-15 at 18:56 +0800, hongbo.zhang wrote:
>> From: "hongbo.zhang" <hongbo.zh...@linaro.com>
>>
>> This driver is based on the thermal management framework in thermal_sys.c. A
>> thermal zone device is created with the trip points to which cooling devices
>> can be bound, the current cooling device is cpufreq, e.g. CPU frequency is
>> clipped down to cool the CPU, and other cooling devices can be added and 
>> bound
>> to the trip points dynamically.  The platform specific PRCMU interrupts are
>> used to active thermal update when trip points are reached.
>>
>> Signed-off-by: hongbo.zhang <hongbo.zh...@linaro.com>
>> Reviewed-by: Viresh Kumar <viresh.ku...@linaro.org>
>> Reviewed-by: Francesco Lavra <francescolavra...@gmail.com>
> 
> Patch is refreshed and applied to thermal next.
> refreshed patch attached.
[...]
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 99b6587..d96da07 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -101,5 +101,25 @@ config EXYNOS_THERMAL
>         If you say yes here you get support for TMU (Thermal Managment
>         Unit) on SAMSUNG EXYNOS series of SoC.
>  
> +config DB8500_THERMAL
> +     bool "DB8500 thermal management"
> +     depends on ARCH_U8500

Shouldn't it depend on THERMAL as well, as in Hongbo's original patch?

> +     default y
> +     help
> +       Adds DB8500 thermal management implementation according to the thermal
> +       management framework. A thermal zone with several trip points will be
> +       created. Cooling devices can be bound to the trip points to cool this
> +       thermal zone if trip points reached.
> +
> +config DB8500_CPUFREQ_COOLING
> +     tristate "DB8500 cpufreq cooling"
> +     depends on ARCH_U8500
> +     depends on CPU_THERMAL
> +     default y
> +     help
> +       Adds DB8500 cpufreq cooling devices, and these cooling devices can be
> +       bound to thermal zone trip points. When a trip point reached, the
> +       bound cpufreq cooling device turns active to set CPU frequency low to
> +       cool down the CPU.
>  
>  endif

--
Francesco

_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev

Reply via email to