Hi Tom,
Normally, I think V8 fastmodels use uefi bootloader and that one
by default is configured to pickup 'Image' file from
SemihostFs (which has VenHw(C5B9C74A-6D72-4719-99AB-C59F199091EB).
I.e you need to place 'Image' file into current directory of
your host from which you are running fastmodel. And generally you
don't really need to have kernel inside of FS, just add copy of
/lib/modules directory.
Here is setup that works for me. Note directory contains
minimal set of files required to run it from virtio blocked
file:
[kamensky@kamensky-w530 myle]$ ls
bl1.bin BL31_AP_Trusted_RAM.bin Image
run_n.sh
BL2_AP_Trusted_RAM.bin fvp-base-gicv2-psci.dtb
linaro-image-minimal.img uefi_fvp-base.bin
[kamensky@kamensky-w530 myle]$ cat run_n.sh
#!/bin/sh
set -x
ARMLMD_LICENSE_FILE=8224@127.0.0.1
export ARMLMD_LICENSE_FILE
#IMAGE=linaro-image-lng.img
IMAGE=linaro-image-minimal.img
/wd/fastmodels/FVP_Base_AEMv8A-AEMv8A/models/Linux64_GCC-4.1/FVP_Base_AEMv8A-AEMv8A
\
-C pctl.startup=0.0.0.0 \
-C bp.secure_memory=0 \
-C cluster0.NUM_CORES=4 \
-C cluster1.NUM_CORES=4 \
-C cache_state_modelled=1 \
-C bp.pl011_uart0.untimed_fifos=1 \
-C bp.secureflashloader.fname=bl1.bin \
-C bp.flashloader0.fname=uefi_fvp-base.bin \
-C bp.virtioblockdevice.image_path=$IMAGE \
-C bp.hostbridge.interfaceName=ARM$USER \
-C bp.smsc_91c111.enabled=true \
-C bp.smsc_91c111.mac_address=00:11:22:33:44:55
If it does not help maybe you could share your FVP
invocation line.
Thanks,
Victor
On 15 January 2014 16:39, Tom Gall <tom.g...@linaro.org> wrote:
> Hi,
>
> So I'm trying to boot an aarch64 kernel with the FVP simulator.
>
> Specifically I'm using the latest open embedded hwpack:
>
> hwpack_linaro-vexpress64-rtsm_20131216-560_arm64_supported.tar.gz
>
> and then an experimental OE image that I put together myself.
>
> The kernel however doesn't even start. Last thing I get after the count down
> is
>
> ERROR : Did not find Linux kernel and it dumps me into the boot manager menu.
>
> I used linaro-media-create to make the image.
>
> linaro-media-create --dev fastmodel --output-directory .
> --image_size=2000M --hwpack
> ./hwpack_linaro-vexpress64-rtsm_20131216-560_arm64_supported.tar.gz
> --binary ./linaro-image-xfce-genericarmv8-20140115214956.rootfs.tar.gz
>
> Thoughts?
>
> --
> Regards,
> Tom
>
> "Where's the kaboom!? There was supposed to be an earth-shattering
> kaboom!" Marvin Martian
> Tech Lead, Graphics Working Group | Linaro.org │ Open source software
> for ARM SoCs
> w) tom.gall att linaro.org
> h) tom_gall att mac.com
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
_______________________________________________
linaro-dev mailing list
linaro-dev@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-dev
