Hi Zygmunt. I've enabled the ARM native build on the QEMU auto builders. These are built in the validation lab on the Natty based tcpanda boards and end up on control under ~cbuild/cbuild/build/qemu-$version/qemu-$something.tar.xz.
I've uploaded this build to http://people.linaro.org/~michaelh/incoming/qemu-armv7l-natty-cbuild236-tcpanda05-cortexa9r1.tar.xz. There's something wrong with embedding of the version number into the name. A quick 'does it run' test passes. Peter, could you check the configure log at: http://builds.linaro.org/toolchain/qemu-linaro-0~20120118+gitcc8661e/logs/armv7l-natty-cbuild236-tcpanda05-cortexa9r1/qemu-configure.txt and see if there's anything missing. The auto builders fire with each commit so there's always something up to date. You can list the builds at: http://ex.seabright.co.nz/helpers/buildlog/qemu and see the raw results at: http://builds.linaro.org/toolchain/qemu-linaro-0~20120118+gitcc8661e/logs/armv7l-natty-cbuild236-tcpanda05-cortexa9r1/ (after a lag) -- Michael ---------- Forwarded message ---------- From: Linaro Toolchain Builder <michael.hope+cbu...@linaro.org> Date: Thu, Jan 26, 2012 at 11:14 AM Subject: [cbuild] qemu-linaro-0~20120118+gitcc8661e armv7l completed To: "linaro-toolchain-bui...@lists.launchpad.net" <linaro-toolchain-bui...@lists.launchpad.net> tcpanda05 finished running job qemu-linaro-0~20120118+gitcc8661e on armv7l-natty-cbuild236-tcpanda05-cortexa9r1. The results are here: http://builds.linaro.org/toolchain/qemu-linaro-0~20120118+gitcc8661e 9 PASS 9 TEST This email is sent from a cbuild (https://launchpad.net/cbuild) based bot which is administered by Michael Hope <michael.h...@linaro.org>. _______________________________________________ linaro-toolchain mailing list linaro-toolchain@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-toolchain
