I'm bringing ursa2. -- Michael
On Fri, Feb 3, 2012 at 12:51 PM, Ramana Radhakrishnan <ramana.radhakrish...@linaro.org> wrote: > Hi Michael, > > On 2 February 2012 02:44, Michael Hope <michael.h...@linaro.org> wrote: >> I've set up a new user on my laptop that we can use for experimenting >> with benchmarks during Connect. Here's what we've got: >> * A user called 'connect' >> * Ramana, Ulrich, Åsa, and myself can log in via SSH > > works for me . > >> * bzr repo for trunk, 4.6, and gcc-linaro 4.6 > > Ack. > >> * Tarballs of all gcc-linaro 4.4, 4.5, and 4.6 releases >> * Tarballs of the recent CSL, Google 4.6, and Android 4.4 compilers >> * A sysroot in ~/sysroot >> * Cross-binutils etch in ~/cross >> * A shared ccache in ~/ccache primed with these >> * A ~/env.sh that sets up the right paths etc >> * A ~/builds/doconfigure.sh that configures for our standard ARMv7-A >> C/C++/Fortran configuration > > I've put a copy of some of the directory names and info from this mail > into a common top level file called README.where just as I was looking > around. > > I've poked around a bit but not tried building anything serious as I > wasn't sure if it would affect your laptop in any other way. > >> * EEMBC, DENBench, and SPEC 2000 under ~/benchmarks > > I haven't tried running any of these but I presume that should fine. > >> >> The trees under build/ build into build/$ver/build and install into >> build/$ver/install. >> >> The benchmarks are set up to cross build and cross run. I've pulled >> ursa2 out of the farm and nuked it, so we can do something like: >> make CROSS_COMPILE=arm-linux-gnueabi- RUN="$PWD/sshrun ursa2" > > Are you carrying ursa2 as well with you or are we running this > remotely from connect ? > > cheers > Ramana _______________________________________________ linaro-toolchain mailing list linaro-toolchain@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-toolchain
