Hi Papadopoulos,
your question have two interpretation mistakes.
What you download from
http://releases.linaro.org/14.05/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
are the compiled and ready to use binaries of linaro toolchain for 32
bits hosts. You only need untar the downloaded file and put it in your
favorite location.
If you want build the linaro toolchain you need download the source code
from
http://releases.linaro.org/14.05/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_src.tar.bz2
and the crosstool-ng-linaro from
http://releases.linaro.org/14.05/components/toolchain/binaries/crosstool-ng-linaro-1.13.1-4.9-2014.05.tar.bz2.
Then follow the steps:
$ tar -jxvf crosstool-ng-linaro-1.13.1-4.8-2014.03.tar.bz2
$ cd crosstool-ng-linaro-1.13.1-4.8-2014.03
$ ./configure // for more configure options type
./configure --help
$ make
$ sudo make install // by default the install location is
/usr/local/bin for binary files, /usr/local/lib for library files and
/usr/local/share for manuals.
$ mkdir linaro-gcc-build
$ cd linaro-gcc-build
$ ct-ng list-samples // list all samples of crosstool
configuration, you can use one of them corresponding to downloaded source code
$ ct-ng linaro-arm-linux-gnueabihf //create configuration for toolchain
compilation
$ ct-ng menuconfig // shows all configurations in a menu,
you are allowed to explore and make changes.
// if you download the toolchain source code, proceed to
untar him and change in menuconfig option "Paths and misc options" / "Local tarballs
directory" and
// specify the location of the untar
source code directory
$ ct-ng build // build the toolchain
If the compilation procedure ends successfully, you can navigate to
"install" directory in the current workspace and check the toolchain
recently created.
Best regards!
Alexis Fajardo Moya.
El 26/06/14 10:57, -- -- escribió:
Hello, as I mentioned in previous emails I cannot build the Linaro
toolchain. I type the following commands:
wget
http://releases.linaro.org/14.05/components/toolchain/binaries/gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
tar -xf gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux.tar.xz
cd gcc-linaro-arm-linux-gnueabihf-4.9-2014.05_linux
sudo su
apt-get build-dep gcc binutils gdb
apt-get install texlive flip
cd lib
wget
http://releases.linaro.org/14.04/components/toolchain/binaries/crosstool-ng-linaro-1.13.1-4.8-2014.04.tar.bz2
tar -xf crosstool-ng-linaro-1.13.1-4.8-2014.04.tar.bz2
cd crosstool-ng-linaro-1.13.1-4.8-2014.04
rm "USE_LSBCC ?= CT_BUILD_USE_LSBCC=y" from contrib/linaro/build.mk
make -f contrib/linaro/build.mk TARGETS=... HOST=linux
***********ERROR: I get the following
error*********************************************
make: contrib/linaro/build.mk: No such file or directory
make: *** No rule to make target `contrib/linaro/build.mk'. Stop.
*********************************************************************************
There is no build.ml file .What is wrong?
Also, I do not understand what exactly to do below. Any help?
*Building requires /bin/sh to be bash. See http://crosstool-ng.org/
for more
* Download the `src` archive
* Download and extract the crosstool-NG tarball
* Change to the crosstool-NG directory
* Extract the `src` archive giving `tarballs/binutils-*` and similar
Thank you
Papadopoulos Haris
_______________________________________________
linaro-toolchain mailing list
linaro-toolchain@lists.linaro.org
http://lists.linaro.org/mailman/listinfo/linaro-toolchain
