On 04/10/2012 12:06 PM, Zygmunt Krynicki wrote:
W dniu 10.04.2012 19:00, Andy Doan pisze:
On 04/10/2012 11:55 AM, Andy Doan wrote:
On 04/10/2012 11:52 AM, Zygmunt Krynicki wrote:
W dniu 10.04.2012 18:50, Andy Doan pisze:
I've been setting up a local LAVA lab on my home network. I've used the
lava-deployment-tool and lava-master-image-scripts to get my Beagle
hooked up.
I'm really close to having everything work. However, when I submit a
job
I hit a problem with the soft-reboot logic not being able to instruct
u-boot to use the test image.
I'm flashing a 12.01 pre-built nano image, but I don't think that
matters. I think the real issue might be something with a newer uboot
being used by the linaro-master-image-script and the device.conf for
beagle not having the right stuff.
That master has not been validated. It fact I'm surprised you managed to
boot it at all because of thumb kernel bugs that generally crash the
system shortly after booting. Out of curiosity, which beagle did you use
C4 or XM?
XM
We should revert the beagle master hwpack to something older that works
well with real hardware and our dispatcher code.
FYI - I tried with the 11.11 release and see the same thing. It looks
like u-boot is never getting into the shell, so the commands we send it
get lost. I'll dig in more when I get some time.
Here's some output with some debug messages I added:
<LAVA_DISPATCHER>2012-04-10 08:43:20 PM INFO: Perform soft reboot the system
]: reboot
root@master:~# [rc=0]:
Broadcast message from root@master
(/dev/ttyO2) at 20:43 ...
The system is going down for reboot NOW!
* Asking all remaining processes to terminate... [80G [74G[ OK ]
* All processes ended within 1 seconds.... [80G [74G[ OK ]
* Deconfiguring network interfaces... [80G [74G[ OK ]
* Deactivating swap... [80G [74G[ OK ]
umount: /run/lock: not mounted
* Will now restart
[ 314.080474] Restarting system.
Texas Instruments X-Loader 1.5.1 (Jul 21 2011 - 02:25:24)
Beagle xM
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2011.09 (Nov 17 2011 - 20:27:44)
OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 512 MiB
WARNING: Caches not enabled
NAND: 0 MiB
MMC: OMAP SD/MMC: 0
*** Warning - readenv() failed, using default environment
In: serial
Out: serial
Err: serial
Beagle xM Rev A
No EEPROM on expansion board
Die ID #33160000061000000156166b0a010019
Net: No ethernet found.
Hit any key to stop autoboot: <LAVA_DISPATCHER>2012-04-10 08:43:31 PM
INFO: ANDY sending uboot cmd: mmc init
<LAVA_DISPATCHER>2012-04-10 08:43:33 PM INFO: ANDY sending uboot cmd:
mmc part 0
2 1 0
The user button is currently NOT pressed.
SD/MMC found on device 0
reading uEnv.txt
** Unable to read "uEnv.txt" from mmc 0:1 **
reading boot.scr
508 bytes read
Loaded script from boot.scr
Running bootscript from mmc0 ...
## Executing script at 80200000
reading uImage
4015048 bytes read
reading uInitrd
1476743 bytes read
reading board.dtb
316 bytes read
## Booting kernel from Legacy Image at 80000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4014984 Bytes = 3.8 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 1476679 Bytes = 1.4 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ...
<LAVA_DISPATCHER>2012-04-10 08:43:35 PM INFO: ANDY sending uboot cmd:
setenv bootcmd 'fatload mmc 0:3 0x80000000 uImage; fatload mmc 0:3
0x81600000 uInitrd; bootm 0x80000000 0x81600000'
_______________________________________________
linaro-validation mailing list
[email protected]
http://lists.linaro.org/mailman/listinfo/linaro-validation
