On 09/18/2012 12:44 AM, Prakash Ranjan wrote:
Hi All,
After deploying any image on my local lava-server setup, in test
image , the resolv.conf file is always missing.
Here is the complete log link. http//paste.ubuntu.com/1212314/
You can check the job fiel at this link.. http//paste.ubuntu.com/1212328
My master image info : http//paste.ubuntu.com/1212330.
Please help me on this issue.
This is a bit of a guess, but I noticed in your job definition you:
1. flash image
2. install lava-test
3. boot
4. run lava-test
Our jobs normally do those 4 steps but in this order:
1. flash image
2. boot
3. install lava-test
4. run lava-test
ie steps 2 and 3 are reversed. My guess is that the "boot" step is
creating this file so things work for us. You could probably just try
that. However, when I look at a current linaro RFS like today's nano
image, I see a /etc/resolv.conf in it.
We could probably also patch the dispatcher so it doesn't fail if the
file doesn't exist.
-andy
_______________________________________________
linaro-validation mailing list
[email protected]
http://lists.linaro.org/mailman/listinfo/linaro-validation
