Ah yes, wrong address, but when scanning for responding IP's I also could only see 4 nodes.
So, power cycled: matthew-hart@linaro-gateway:~$ cxmanage ipinfo calxeda02-00-03 Getting IP addresses... 1 successes | 0 errors | 0 nodes left | . IP info from calxeda02-00-03 Node 0: 192.168.2.75 Node 1: 192.168.2.78 Node 2: 192.168.2.81 Node 3: 192.168.2.84 Node 4: 192.168.2.87 Node 5: 192.168.2.90 Node 6: 192.168.2.93 Node 7: 192.168.2.96 Node 8: 192.168.2.99 Node 9: 192.168.2.102 Node 10: 192.168.2.105 Node 11: 192.168.2.108 Node 12: 192.168.2.111 Node 13: 192.168.2.114 Node 14: 192.168.2.117 Node 15: 192.168.2.120 Node 16: 192.168.2.123 Node 17: 192.168.2.126 Node 18: 192.168.2.129 Node 19: 192.168.2.132 Node 20: 192.168.2.135 Node 21: 192.168.2.138 Node 22: 192.168.2.141 Node 23: 192.168.2.144 Much better. Thanks all, Matt. On 20 August 2013 10:24, Steve Capper <[email protected]> wrote: > Hi Matt, > I think you meant: calxeda02-00-03? > I get the following when checking for IPs (Matt Gretton-Dann was at my > desk asking about Calxeda02 just now :-) ): > steve-capper@linaro-gateway:~$ cxmanage ipinfo calxeda02-00-03 > Getting IP addresses... > 1 successes | 0 errors | 0 nodes left | . > > IP info from calxeda02-00-03 > Node 0: 192.168.2.75 > Node 1: 192.168.2.78 > Node 2: 192.168.2.81 > Node 3: 192.168.2.84 > > i.e. only one card active? > > So I think it is a good idea to power cycle. > > Cheers, > -- > Steve > > On 20 August 2013 10:13, Matt Hart <[email protected]> wrote: > > Hi all, > > > > For reasons I'm yet to establish, the management node of calxeda02 has > > become unresponsive and unreachable on our network. > > > > linaro-gateway:~$ cxmanage macaddrs calxeda02-00-02 > > Getting MAC addresses... > > 0 successes | 1 errors | 0 nodes left | . > > > > Command failed on these hosts > > calxeda02-00-02 : [Errno -2] Name or service not known > > > > I've checked the obvious things like cables etc, but our DHCP logs show 3 > > nodes making requests within the last couple of days and they all use the > > same link cable so it doesn't seem a physical networking issue. > > > > If nobody has any reservations or comments, I'd like to power cycle the > box > > as a first step. > > > > Matt > > > > >
_______________________________________________ linaro-validation mailing list [email protected] http://lists.linaro.org/mailman/listinfo/linaro-validation
