Ah ok. :) Can you confirm you have these value set in your foundation configuration?
bootloader_prompt = Start: interrupt_boot_prompt = The default boot selection will start in On 20 February 2014 15:26, Basil Eljuse <basil.elj...@arm.com> wrote: > Hi Tyler, > > > > The below is bit of 'misnomer', Dean just had the device name labelled > incorrectly. > > > > "device_type": "ARM-rtsm_fvp_base-aemv8a", > > > > The actual model invocation happening is indeed Foundation_v8. > > > > For base model, both AEM and Cortex, the boot_cmds worked perfectly as in > indicated earlier. It was only for foundation I could see no response to > any of my boot commands in json file ): > > > > Thanks > > Basil Eljuse... > > > > > > *From:* Tyler Baker [mailto:tyler.ba...@linaro.org] > *Sent:* 20 February 2014 23:17 > > *To:* Basil Eljuse > *Cc:* Linaro Validation > *Subject:* Re: [Linaro-validation] Any known issues with boot_cmds > support on foundation models... > > > > The log file and job def are targeted at the base model? Not a foundation? > > > > I modified the job def a bit and it's booting for me on the base model: > > > > http://community.validation.linaro.org/scheduler/job/6261/definition > > > > On 20 February 2014 14:45, Basil Eljuse <basil.elj...@arm.com> wrote: > > Sorry Tyler, > > I should have copied the entire snippet. I already do have that defined > > > > { > > "command": "deploy_linaro_image", > > "parameters": { > > "bootloadertype": "uefi", > > "hwpack": " > http://releases.linaro.org/14.01/openembedded/aarch64/hwpack_linaro-vexpress64-rtsm_20140126-596_arm64_supported.tar.gz > ", > > "rootfs": " > http://releases.linaro.org/14.01/openembedded/aarch64/linaro-image-minimal-genericarmv8-20140127-635.rootfs.tar.gz > " > > } > > }, > > > > Attaching my full json for ref. Also the lava log output. > > > > Thanks > > Basil Eljuse... > > > > *From:* Tyler Baker [mailto:tyler.ba...@linaro.org] > *Sent:* 20 February 2014 22:38 > > > *To:* Basil Eljuse > *Cc:* Linaro Validation > *Subject:* Re: [Linaro-validation] Any known issues with boot_cmds > support on foundation models... > > > > Hi Basil, > > > > After reviewing the code if you add the parameter "bootloadertype" to uefi > in the deployment action similar to this example: > > > > http://community.validation.linaro.org/scheduler/job/6139/definition > > > > LAVA will attempt to issue your boot_cmds. > > > > Let me know! > > > > On 20 February 2014 14:30, Tyler Baker <tyler.ba...@linaro.org> wrote: > > Hi Basil, > > > > We have never had to use UEFI on the Foundation model before, so no > boot_cmds are used. I'm working on some of the fastmodel issues today, and > will have a look at what it will take to support UEFI. > > > > Cheers, > > > > On 20 February 2014 14:20, Basil Eljuse <basil.elj...@arm.com> wrote: > > Hello All, > > > > I am able to successfully use the following boot_cmds option in Base model > instances. However if I use the same on foundation model it does not work. > > > > It comes to the uefi menu option and is not seem to issue any of my boot > commands as defined in the json file. > > > > Is it possible that for foundation models the boot_cmds option is not > supported? > > > > My json fragment is > > > > "boot_cmds": [ > > "sendline 3", > > "expect Choice:", > > "sendline 2", > > "expect Update entry:", > > "sendline 1", > > "expect File path of the EFI Application or the > kernel: Image", > > "sendline \n", > > "expect Keep the initrd: [y/n]", > > "sendline n", > > "expect Arguments to pass to the binary: > console=ttyAMA0 earlyprintk=pl011,0x1c090000 debug user_debug=31 > loglevel=9", > > "sendline \b9 root=/dev/vda2 rw", > > "expect Description for this new Entry: Linux from > SemiHosting", > > "sendline \n", > > "expect Choice:", > > "sendline 5", > > "expect Start:", > > "sendline 1" > > ], > > > > Any confirmation would be great! > > > > Thanks > > Basil Eljuse... > > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782 > > > > _______________________________________________ > linaro-validation mailing list > linaro-validation@lists.linaro.org > http://lists.linaro.org/mailman/listinfo/linaro-validation > > > > > > -- > > Tyler Baker > Technical Architect, LAVA > Linaro.org | Open source software for ARM SoCs > Follow Linaro: http://www.facebook.com/pages/Linaro > http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog > > > > > > -- > > Tyler Baker > Technical Architect, LAVA > Linaro.org | Open source software for ARM SoCs > Follow Linaro: http://www.facebook.com/pages/Linaro > http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog > > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782 > > > > > > -- > > Tyler Baker > Technical Architect, LAVA > Linaro.org | Open source software for ARM SoCs > Follow Linaro: http://www.facebook.com/pages/Linaro > http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog > > -- IMPORTANT NOTICE: The contents of this email and any attachments are > confidential and may also be privileged. If you are not the intended > recipient, please notify the sender immediately and do not disclose the > contents to any other person, use it for any purpose, or store or copy the > information in any medium. Thank you. > > ARM Limited, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2557590 > ARM Holdings plc, Registered office 110 Fulbourn Road, Cambridge CB1 9NJ, > Registered in England & Wales, Company No: 2548782 > -- Tyler Baker Technical Architect, LAVA Linaro.org | Open source software for ARM SoCs Follow Linaro: http://www.facebook.com/pages/Linaro http://twitter.com/#!/linaroorg - http://www.linaro.org/linaro-blog
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
