Hi Kevin, Given I wrote that support I *should* know the answer. :)
I *think* if you set vexpress_complete_firmware = true in the device config in /etc/lava-dispatcher/devices/(your-juno-name).conf it should work. Let me know how you get on! Dave > On 16 Sep 2015, at 01:22, Kevin Hilman <khil...@linaro.org> wrote: > > How to tell LAVA to not try an update the firmware my juno-r1 board? > > The default juno device type points to a tarball[1] it uses to > update/replace the juno firmware, unfortunately, that tarball seems to > only be configured for Juno, not the juno R1. > > After and unpack/flash/reboot, the juno board fails to boot with: > > ERROR: File not found \MB\HBI0262C\board.txt > > Note the 'C' in the board name HBI0262C, whereas the tarball only > contains HBI0262B. > > I have flashed working firmware onto my Juno R1 and would like LAVA to > leave it alone. Is there a way to do that? > > Kevin > > > [1] http://images.validation.linaro.org/juno/board-recovery-image.tgz > _______________________________________________ > linaro-validation mailing list > linaro-validation@lists.linaro.org > https://lists.linaro.org/mailman/listinfo/linaro-validation
signature.asc
Description: Message signed with OpenPGP using GPGMail
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-validation
