Dear Neil and Linaro validation support team, Start with a known device type, e.g. KVM. > There is a video of the full process here: > https://www.linaro.org/projects/test-validation/ > You've done some of the steps but things will be a lot clearer if you > follow the rest of the steps > This video may also help: > https://www.youtube.com/watch?v=M5kF3yPjYTk
> The tools you use will depend on your particular lab. ser2net is common > and flexible for serial connections, many labs would find it much > better than using sg or screen. tftp transmission typically does not > need to be configured - the tftpd-hpa package is installed by > lava-dispatcher dependencies and can be used as-installed. > Thank you for provided these tutorial video, and I've installed virtual device (e.g. kvm ) in my lava instance and some basic yaml test file in lava_test_shell. But I still could not install these test into physical devices, I wonder could it possible to bypass the deploy_image / boot steps, and run test directly. To test the ser2net connection, I've edited the /etc/ser2net.conf and device.conf , and connected to the device via lava connect <device> successfully. And other actions reminded to deploy the image, so I've tried 'dummy_deploy' in the job definition, but it still could not install 'test' into device. I'm not sure is there anything that I forgot to notice.. And could you provide some basic device.conf and job definition that could bypass the deploy / boot image steps . Thank you so much. Best Regards, C.H. Wu
_______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-validation
