Yes, I have tried it outside and it produces the login shell. I was thinking the same for the timeout. How can I change this timeout in order to give the board sufficient time to get to the login prompt? I even made the timeout for the boot action to 6 minutes and still have the same issue.
-----Original Message----- From: Matt Hart [mailto:matthew.h...@linaro.org] Sent: Tuesday, July 12, 2016 9:29 AM To: Albarran, Josue Cc: linaro-validation@lists.linaro.org Subject: Re: [Linaro-validation] Pipeline Job Submission Have you tried this boot outside of Lava? It's either a timeout is too short and doesn't give your board enough time to get to the login prompt, or the rootfs you are loading does not produce a login shell. On 12 July 2016 at 15:24, Albarran, Josue <j-albar...@ti.com> wrote: > Hi, > > > > I’m having an issue where the board (beaglebone-black) starts the > booting process using the u-boot commands that I specify but gets > interrupted before it gets to the “am335x-evm login:” login prompt. I > get the following exception http://pastebin.ubuntu.com/19177228/. Any > known fix for this issue? > > > > This is the complete boot log section of the pipeline actions > http://pastebin.ubuntu.com/19177444/. Also, my YAML job definition can > be found here http://pastebin.ubuntu.com/19177546/. > > > > I will appreciate a response. > > > > Thanks, > > > > Josue > > > _______________________________________________ > linaro-validation mailing list > linaro-validation@lists.linaro.org > https://lists.linaro.org/mailman/listinfo/linaro-validation > _______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-validation
