On Tue, Jun 06, 2017 at 05:10:12PM +0200, Vincent Guittot wrote: >On 6 June 2017 at 16:55, Steve McIntyre <steve.mcint...@linaro.org> wrote: >> >> Vincent: how have you configured your tests with these specific /dev >> paths? Are your tests set up to only use specific test boards with a >> specific arm-probe config file (device tags?), or are you generating >> the config file somehow for each test? > >We have one AEP config file per board. As we can use >/dev/serial/by-id/ path in our current test env, we don't have to >update it as the config file is always valid >Then select the right config file according to the board we want to >use for our test
OK. So you're selecting a specific board for your test - that's useful to know! >> At the moment, in LAVA we're passing the appropriate /dev/ttyACMx >> device node into the LXC as we start things up. That's clearly not >> going to scale here once you're wanting to use more than one AEP in a >> single test. So, I'm working on this right now. *Hopefully* I'll be >> able to replicate the /dev/serial/by-id paths - I'll update you >> shortly. > >This would help us if you are able to replicate the /dev/serial/by-id >paths in the LXC because it would just be a matter of providing the >right config file name OK, will get back to you... Cheers, -- Steve McIntyre steve.mcint...@linaro.org <http://www.linaro.org/> Linaro.org | Open source software for ARM SoCs _______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org https://lists.linaro.org/mailman/listinfo/linaro-validation
