Hello, as the title says... I'm on a bit of a problem here. I'm running
Ubuntu Studio and trying to get my POD Studio UX2 working here (It's
actually the las sthing that attaches me to Winbugs, so I'd be greately
happy if I could make this work!!) I installed line6usb drivers from the
sources in the trunk using wget and my terminal, and mi Studio UX2 is known
by my computer now... the thing is that I can't seem to be able to open a
jack server with it so I can't make no playing and no recording :S Most of
the times I plug it in and it gets on nicely, but with the annoying thing
that one of the clip lights is turned on (Not quite sure what that means if
I'm not playing or even not with the guitar plugged in...). Anyway,
something that I've noticed is that, yesterday I plugged in my UX2 and got
recognized without any of the clip buttons lightened up... miraculously I
press "Start" on Qjackctl and the server started flawlessly!!! And when I
selected JACK output with Audacious I could actually hear audio from my
headphones connected to the UX2 (Made me so happy :') ). At some point I
tried to lower down the volume on the control of my hardware, no more sound
was played and crashed my audacious... (same thing happened later by
modifying the volume controls on my computer instead of on my UX2) Now
somehow I couldn't go back to plug my UX2 in and don't get any clip light
on or Jack server up... Help please!!
*Here's what I get when I try to start Qjackctl:*
10:07:16.231 Patchbay desactivada.
10:07:16.364 Reiniciar estadísticas.
10:07:16.372 Cambios en las conexiones ALSA.
10:07:16.392 D-BUS: Disponible (org.jackaudio.service aka jackdbus).
10:07:16.635 D-BUS: El servidor JACK no puede iniciarse. Disculpa
Cannot connect to server socket err = No existe el archivo o el
directorio
Cannot connect to server request channel jack server is not running or
cannot be started
Cannot connect to server socket err = No existe el archivo o el
directorio
Cannot connect to server request channel jack server is not running or
cannot be started 10:07:16.685
Cambió el gráfico de conexiones ALSA. Sat May 18 10:07:16 2013:
Starting jack server...
Sat May 18 10:07:16 2013: JACK server starting in realtime mode with
priority 10
Sat May 18 10:07:16 2013: control device hw:2
Sat May 18 10:07:16 2013: control device hw:2
Sat May 18 10:07:16 2013: [1m[31mERROR: Failed to acquire device name :
Audio2 error : Cannot allocate memory[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: Audio device hw:2 cannot be
acquired...[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: Cannot initialize driver[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: JackServer::Open failed with
-1[0m
Sat May 18 10:07:16 2013: [1m[31mERROR: Failed to open server[0m
Sat May 18 10:07:17 2013: Saving settings to
"/home/german/.config/jack/conf.xml" ...
10:07:18.893 No puede conectarse al servidor JACK como cliente. - La
operación global falló. - No puede conectarse al servidor. Por favor revise
la ventana de mensajes para mas información.
Cannot connect to server socket err = No existe el archivo o el
directorio
Cannot connect to server request channel
jack server is not running or cannot be started
*Here's what I get on arecord -l:*
german@Asd:~$ arecord -l
**** Lista de CAPTURE dispositivos hardware ****
tarjeta 0: SB [HDA ATI SB], dispositivo 0: ALC269VB Analog [ALC269VB
Analog]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 2: PODStudioUX2 [POD Studio UX2], dispositivo 0: POD Studio UX2
[POD Studio UX2]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
*And here's what I get on aplay -l:*
german@Asd:~$ aplay -l
**** Lista de PLAYBACK dispositivos hardware ****
tarjeta 0: SB [HDA ATI SB], dispositivo 0: ALC269VB Analog [ALC269VB
Analog]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 1: Generic [HD-Audio Generic], dispositivo 3: HDMI 0 [HDMI 0]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
tarjeta 2: PODStudioUX2 [POD Studio UX2], dispositivo 0: POD Studio UX2
[POD Studio UX2]
Subdispositivos: 1/1
Subdispositivo #0: subdevice #0
So... the hardware is detected... but somehow jack can't communicate with
it so well... Any hint?
*Now when the Jack server starts succesfully and I try to route something
to the UX2 now I get this:*
Sat May 18 10:29:35 2013: [1m[31mERROR: ALSA: poll time out, polled for
8706070 usecs[0m
Sat May 18 10:29:35 2013: [1m[31mERROR: JackAudioDriver:rocessAsync: read
error, stopping...[0m 10:29:51.928 Cambió el gráfico de conexiones ALSA.
Sat May 18 10:29:51 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:29:51 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:29:51 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:30:39 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:30:39 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:30:39 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:31:39 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:31:39 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:31:39 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:31:44 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:31:44 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:31:44 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:32:08 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:32:08 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:08 2013: [1m[31mERROR: Cannot create new client[0m
10:32:12.864 Cambió el gráfico de conexiones ALSA.
Sat May 18 10:32:13 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:32:13 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:13 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:32:37 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:32:37 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:37 2013: [1m[31mERROR: Cannot create new client[0m
Sat May 18 10:32:42 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:32:42 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:32:42 2013: [1m[31mERROR: Cannot create new client[0m
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction:
assertion `GTK_IS_WIDGET (widget)' failed
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction:
assertion `GTK_IS_WIDGET (widget)' failed
Sat May 18 10:38:19 2013: [1m[31mERROR:
JackPosixProcessSync::LockedTimedWait error usec = 5000000 err = Connection
timed out[0m
Sat May 18 10:38:19 2013: [1m[31mERROR: Driver is not running[0m
Sat May 18 10:38:19 2013: [1m[31mERROR: Cannot create new client[0m
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction:
assertion `GTK_IS_WIDGET (widget)' failed
(qjackctl.real:2541): Gtk-CRITICAL **: IA__gtk_widget_get_direction:
assertion `GTK_IS_WIDGET (widget)' failed
And when I try to open Rakarrack a message window appears that says that no
jack server is detected :S
I'm a bit confused, and now jack don't start at all and I don't have the
clip light on... -.-
------------------------------------------------------------------------------
AlienVault Unified Security Management (USM) platform delivers complete
security visibility with the essential security capabilities. Easily and
efficiently configure, manage, and operate all of your security controls
from a single console and one unified framework. Download a free trial.
http://p.sf.net/sfu/alienvault_d2d
_______________________________________________
Line6linux-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/line6linux-user
