Hello Bessie,
Your best bet is to use the PDF Xtra from Integration New Media.
You can either open a PDF Document by specifying the pathname in the PDF Cast Member
or by using Lingo(PDF_Open method).
- First you would need to visit <www.IntegrationNewMedia.com>.
- Then you need to download the fully functional, unregistered Xtra from our site at
<http://www.integrationnewmedia.com/download/>.
- Extract the zip file's contents into your Director' Xtras folder.
- Load Director.
- Open a New or Existing project.
- Select from Director's toolbar Insert, New Media Element, PDF Document.
You should now have a PDF Cast Member.
- In the properties window, select the PDF Document you wish to open.
- Select OK
- From your Cast, Drag and Drop the cast member onto the stage.
- Click Play and you are done.
Very nice and simple.
To modify its display and options, I would recommend looking into our manual that you
can download at <http://www.integrationnewmedia.com/support/pdfdirector/manuals/>.
Also, you need to make sure that either Acrobat or the Reader is installed on your
machine.
I hope this helps you and contact me if you would like any further information.
Steve
Steve Zografakis
Technical Support Coordinator
Integration New Media, Inc.
http://www.IntegrationNewMedia.com
[To remove yourself from this list, or to change to digest mode, go to
http://www.penworks.com/lingo-l.cgi To post messages to the list, email
[EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]). Lingo-L is for
learning and helping with programming Lingo. Thanks!]
