Sorry Micke I assumed that the paste worked properly and didn't check. I have the prop list defined correctly with "#prop:value", for some reason the paste to Outlook removed the colons.
Interestingly tempPoint[1] and tempPoint.locH work simliarly, and I still have the problem with it not setting. Here's an output from the message window: -- point(148, 37) -- point(0, 37) -- point(148, 37) -- "__________________________________________" The first value is the regPoint being read into tempPoint, the second is the altered point value in tempPoint and the third is the regPoint after I have attempted to set it. Any idea what is going wrong? I thought maybe the values would be updated after a frame (happens sometimes in Flash) but reading regPoint later in time makes no difference. So I'm left concluding that you can't set the regPoint of filmloops? What do you reckon? Cheers Simon P.S. The sig gets put in by my ever helpful information security team, so even if I was swedish I couldn't lose it :( -----Original Message----- From: Mikael Wir�n [mailto:[EMAIL PROTECTED]] Sent: 26 November 2001 16:25 To: [EMAIL PROTECTED] Subject: RE: <lingo-l> regPoint in Filmloops > I'm trying to set the regPoint property on some Filmloops > using the code > below. However the property doesn't want to be set. > > Any ideas anyone? Hi Simon, first of all you have to separate your proplist props from their value with a : like: <e-mail lingo> regPoints = [[#name:"right1",#pos:point(0,0),#adj:-5]] then you have to adress your change of the locH like this: tempPoint[1] = regPoints[i].pos[1] </e-mail lingo> then it should work me thinks =) Very fast answer beware of the swift bug ;) Hey i�m only Swedish, but i cut my sig out =) Ta ta /Micke [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]) Lingo-L is for learning and helping with programming Lingo. Thanks!] ______________________________________________________________ CONFIDENTIALITY NOTICE This communication and the information it contains is intended for the person or organisation to whom it is addressed. Its contents are confidential and may be protected in law. Unauthorised use, copying or disclosure of any of it may be unlawful. If you are not the intended recipient, please contact us immediately. The contents of any attachments in this e-mail may contain software viruses, which could damage your own computer system. While Marlborough Stirling has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checking procedure before opening any attachment. Marlborough Stirling plc, Registered No. 3008820, Allen Jones House, Jessop Avenue, Cheltenham, Gloucestershire, GL50 3SH Tel: 01242 547000 Fax: 01242 547100 http://www.marlborough-stirling.com The following companies are subsidiaries of Marlborough Stirling plc and are registered in England and Wales at the above address: Marlborough Stirling PLC, Registered No. 3008820 The Marlborough Stirling Group PLC, Registered No. 1855353 Marlborough Stirling Administration Limited, Registered No. 2341195 Metgem Limited, Registered No. 02341195 [To remove yourself from this list, or to change to digest mode, go to http://www.penworks.com/lingo-l.cgi To post messages to the list, email [EMAIL PROTECTED] (Problems, email [EMAIL PROTECTED]) Lingo-L is for learning and helping with programming Lingo. Thanks!]
