Hello, Since 1.1.0 linphone understands abreviated destinations. If you define a default proxy, calling 'mother' will call sip:[EMAIL PROTECTED] This is can be used for phone numbers. Calling 894849 will call sip:[EMAIL PROTECTED] It's the job of the proxy to make the translation from the number to the final sip destination.
Simon Le Mercredi 3 Août 2005 06:24, Vidhya Venkat a écrit : > Hello all, > > I am new to VOIP and linphone. We are planning to develop a voip add > on board to be interfaced with our host system, based on linux. > > Our design of VoIP add on board goes this way... It has a telephone > connected to it. The VoIP add on board has an application and hardware > for SLIC and dsp codecs such as G.723.1, G.711, G.729 which does the > voice compression and RTP packetization. > > So we are planning to use the console version of linphone on our host > system. We want to make use of the SIP functionality available with > linphone. > > As per the reading from the linphone it is found that it expects a SIP > URL in the form of [EMAIL PROTECTED] We have only the provision to input the > enduser SIP Phone no. using the telephone. > > My doubts are, > > 1. Is it possible and sufficient to use the telephone keypad alone for > calling (dialing) the SIP based end user. > > 2. Also is it possible to give the same dtmf digits as input to SIP > application in the linphone to get it connected to the other end user? > > We would appreciate your help in this regard. > > Please advice. > > Thanks & Regards, > Vidhya Sankari > > > _______________________________________________ > Linphone-developers mailing list > [email protected] > http://lists.nongnu.org/mailman/listinfo/linphone-developers _______________________________________________ Linphone-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/linphone-users
