Hi, SIP and RTP use UDP not TCP. You have to open UDP ports 7078 and 5060.
Simon Le mercredi 14 juin 2006 21:39, William Bulley a écrit : > I have installed linphone 1.3.5 on two FreeBSD 6.1 machines > and demonstrated that it works as advertised on my local > (private) LAN between those two systems using non-routeable, > RFC-1918 (net ten) IP addresses. When I try to use linphone > across the Internet to another FreeBSD 6.1 user also running > linphone 1.3.5 (both of us have firewalls), it does not work > as advertised. We are able to connect using SIP and to chat > in the chat window (ASCII text only), so I do know that both > linphone configurations are correct at least for SIP. However, > no RTP audio works between the two instances: my local linphone > and the remote (to me) user's linphone. > > Both of our firewalls have been configured to allow inbound > access from any source to our local LAN machines for both > the SIP protocol (on TCP port 5060) and the RTP protocol (on > TCP port 7078). Since the complete linphone application is > known to work on my local LAN between two local machines, I > am suspecting that something is amiss with the configuration > of the firewall on my end or the firewall on the other end. > > I can give further details of my firewall setup if needed, > but I thought I might ask here first if there is something > else that I need to check. Maybe I am missing something > obvious (but not to a new user of linphone) that is simple > to correct. Thanks! > > Regards, > > web... > > -- > William Bulley Email: [EMAIL PROTECTED] > > > > _______________________________________________ > Linphone-users mailing list > [email protected] > http://lists.nongnu.org/mailman/listinfo/linphone-users _______________________________________________ Linphone-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/linphone-users
