Did you finally found a workaround for the terminal issue ? Looks like a problem with readline support.
- concerning oRTP: yes there is a difference between the lastest oRTP released and the one embedded in linphone (my fault). The one embedded in linphone tarball always works (guaranteed). About the cpu usage: which codec did you use ? How powefull is your machine ? speex and gsm codecs are the most cpu consuming. G711 Alaw and mulaw consume very few cpu: enable only these two ones by editing the ~/.linphonerc config file. Simon Le Wednesday 23 April 2008 09:39:01 alex, vous avez écrit : > Sorry to flood, but this is a seperate issue. > > Top output: > --------------- > > last pid: 24352; load averages: 1.15, 1.09, > 1.03 > up 0+03:41:12 16:39:24 > 58 processes: 3 running, 55 sleeping > CPU states: 30.8% user, 0.0% nice, 68.8% system, 0.4% interrupt, 0.0% > idle > Mem: 75M Active, 266M Inact, 94M Wired, 440K Cache, 112M Buf, 1552M Free > Swap: 2007M Total, 2007M Free > > PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND > 24339 ahhyes 4 97 0 7032K 4064K RUN 0:35 104.79% linphonec > > Side effect is choppy audio. When cpu usage drops under 100% audio > quality if fine for that period. > Is this program doing something naughty in its main loop? > > How can I find out what is bogging things down. > > > > _______________________________________________ > Linphone-users mailing list > [email protected] > http://lists.nongnu.org/mailman/listinfo/linphone-users _______________________________________________ Linphone-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/linphone-users
