Simon, still the linphone hangs for me with the video enabled.
Thanks and Regards, HarishKumar.V On Fri, Aug 28, 2009 at 4:12 PM, Harishkumar V <[email protected]>wrote: > Simon, > > When the video is disabled, this does not happen. > > my ffmpeg configure option is, > > ./configure --prefix=$PREFIX --enable-shared --enable-cross-compile > --cross-prefix=arm-none-linux-gnueabi- --arch=arm --enable-libvorbis > --enable-libtheora --enable-gpl --enable-x11grab --enable-libopenjpeg > --enable-libspeex --cpu=armv7-a > > I think i need to add "mcpu=cortex-a8" and "neon" to compiler flags and try > to recompile the ffmpeg and test whether this can make any difference. > > Thanks and Regards, > HarishKumar.V > > > On Fri, Aug 28, 2009 at 2:40 PM, Simon Morlat > <[email protected]>wrote: > >> Hi, >> >> BUG: soft lockup - CPU#0 stuck for 61s! [linphone-3:606] >> Ater a google search, it seems this message comes from the linux kernel. >> I don't know if it is a cause or a consequence of something else. >> The mpeg4 decoding errors seems to indicate that video packets have been >> dropped, probably because the processor doesn't succeed in decoding in >> realtime. >> Is your ffmpeg enough ARM-optimized to run on your processor ? >> Does this problem happens also when video is disabled? >> >> Simon >> >> Le vendredi 28 août 2009 07:42:12, Harishkumar V a écrit : >> > Hi, >> > >> > I am running linphone-3.1.2 on ARM Board. >> > >> > I have resigstered two accounts in sip.antisip.com >> > >> > Testing setup: >> > >> > linphone 3.1.2 (ARM BOARD) and linphone3.1.2 (UBUNTU PC) over the >> > internet. both have stun server ipaddress as stun.tpad.com. >> > >> > both have same audio and video codecs enabled. >> > >> > audio codecs: PCMU, PCMA, ILBC >> > video codecs: MPEG4V-ES, theora, H263-1998,xsnow >> > >> > >> > Now, after setting up the call, audio and video conversation happens. >> > But, after sometime, linphone at ARM board end hangs and it reports, >> > >> > [mpeg4 @ 0x29b200]concealing 97 DC, 97 AC, 97 MV errors >> > [mpeg4 @ 0x29b200]header damaged >> > [mpeg4 @ 0x29b200]2. marker bit missing in 3. esc >> > [mpeg4 @ 0x29b200]Error at MB: 63 >> > [mpeg4 @ 0x29b200]marker does not match f_code >> > [mpeg4 @ 0x29b200]concealing 99 DC, 99 AC, 99 MV errors >> > [mpeg4 @ 0x29b200]header damaged >> > Last message repeated 1 times >> > [mpeg4 @ 0x29b200]ac-tex damaged at 3 5 >> > [mpeg4 @ 0x29b200]Error at MB: 63 >> > [mpeg4 @ 0x29b200]marker does not match f_code >> > Last message repeated 2 times >> > [mpeg4 @ 0x29b200]concealing 99 DC, 99 AC, 99 MV errors >> > [mpeg4 @ 0x29b200]cbpc damaged at 4 5 >> > [mpeg4 @ 0x29b200]Error at MB: 64 >> > [mpeg4 @ 0x29b200]marker does not match f_code >> > [mpeg4 @ 0x29b200]concealing 99 DC, 99 AC, 99 MV errors >> > BUG: soft lockup - CPU#0 stuck for 61s! [linphone-3:606] >> > >> > >> > Thanks and Regards, >> > HarishKumar.V >> >> >
_______________________________________________ Linphone-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/linphone-users
