Hi all.
I made some test with the lastest Linphone version, on Elastix 1.6.2.7
(Asterisk 1.4).
This configuration including a GXV3601 (Gateway video / sip
Grandstream), a eyebeam 1.5.
I use h264 codec.
I've an Samsung Galaxy S with the lastest Android version.
I can use only the h264 codec. Good, Linphone seems right do it, but no.
:-[
When I call Linphone, or I receive a call from Eyebeam, the video is
bad, and Linphone is freezing.
When I call the GXV3601, I can see anything. However it's a H264 codec.
About audio codec, i use only the gsm.
Just to forwarding my experience. ;-)
Else, Linphone will be a good application to me, when the video will be
ready to work. :-)
Regards
*/Franck Danard/*
Le 26/02/2011 15:29, Liviu Andronic a écrit :
On Sat, 26 Feb 2011 13:58:31 +0100, Dragos D <[email protected]> wrote:
You have to install libssl and libssl-dev
Now I enabled H264 on both computers, but the video issues persist. On
both computers the up speed averages 10 kbytes/s, which I understand
isn't nearly enough for video, although the upload speed limit is set
to 128kbytes/s; sometimes the image is acceptable, but much of the
time it is not. Testing SIP Communicator in similar conditions (same
internet connection, same video codec) I get better results, with up
speeds ranging from 20 to 60 kbytes/s.
Am I doing something wrong? Could there be a bug in linphone limiting
the up speed? How could I check that? Regards
Liviu
_______________________________________________
Linphone-users mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/linphone-users
_______________________________________________
Linphone-users mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/linphone-users
