Hi all, When I start linphone I can see my own picture from the webcam on both machines (so the webcams are basically working). But when I call the other client (also running linphone 3.5.2), the video picture disappears and nothing is visible anymore. I can only hear voice.
I have tested it on different plattforms with the same result: ubuntu 12.04 (64 bit) -> ubuntu 12.04 (64bit) ubuntu 12.04 (64bit) -> Windows7 (32 bit) ubuntu 12.04 (64 bit) -> Android 4 (linphone 1.2.2) I tried it with and without a stun server. I tried it with both client in the same local network and connected to different ISPs. I had a look on the log output, but cannot find any hint what could be wrong (attached at the end of this E-Mail). The only warnings I get are: "[warning] No valid video stream defined" and "[warning] Not enough ref samples, using zeroes". Does anybody has/had similar problems? Can this problem be related to my SIP provider (nfon.net)? Since Video call support is a nice feature I would be very grateful for some hints. best regards main tain Linphone log: =============================================================== ..... [20120602-11:39:58] [message] Call 0x27e0440: moving from state LinphoneCallOutgoingRinging to LinphoneCallConnected [20120602-11:39:58] [message] ms_filter_unlink: MSFilePlayer:0x2803df0,0-->MSDtmfGen:0x2803a50,0 [20120602-11:39:58] [message] ms_filter_unlink: MSDtmfGen:0x2803a50,0-->MSAlsaWrite:0x2803b50,0 [20120602-11:39:58] [message] Audio (ring) MSTicker thread exiting [20120602-11:39:58] [message] Audio bandwidth for this call is 80 [20120602-11:39:58] [message] Payload's bitrate is 80000 [20120602-11:39:58] [message] Setting audio encoder network bitrate to 80000 [20120602-11:39:58] [message] MSAlawEnc: got ptime=20 [20120602-11:39:58] [message] ms_filter_link: MSAlsaRead:0x2803a50,0-->MSSpeexEC:0x27e7c00,1 [20120602-11:39:58] [message] ms_filter_link: MSSpeexEC:0x27e7c00,1-->MSVolume:0x2806540,0 [20120602-11:39:58] [message] ms_filter_link: MSVolume:0x2806540,0-->MSAlawEnc:0x2809810,0 [20120602-11:39:58] [message] ms_filter_link: MSAlawEnc:0x2809810,0-->MSRtpSend:0x27544d0,0 [20120602-11:39:58] [message] ms_filter_link: MSRtpRecv:0x280aa20,0-->MSAlawDec:0x2806440,0 [20120602-11:39:58] [message] ms_filter_link: MSAlawDec:0x2806440,0-->MSDtmfGen:0x2803b50,0 [20120602-11:39:58] [message] ms_filter_link: MSDtmfGen:0x2803b50,0-->MSVolume:0x280a4d0,0 [20120602-11:39:58] [message] ms_filter_link: MSVolume:0x280a4d0,0-->MSEqualizer:0x27edb00,0 [20120602-11:39:58] [message] ms_filter_link: MSEqualizer:0x27edb00,0-->MSSpeexEC:0x27e7c00,0 [20120602-11:39:58] [message] ms_filter_link: MSSpeexEC:0x27e7c00,0-->MSAlsaWrite:0x27f5d70,0 [20120602-11:39:58] [message] Initializing speex echo canceler with framesize=64, filterlength=2000, delay_samples=0 [20120602-11:39:58] [message] Priority used: 99 [20120602-11:39:58] [message] Audio MSTicker setpriority() failed: Permission denied, nevermind. [20120602-11:39:58] [message] Filter MSRtpRecv is already being scheduled; nothing to do. [20120602-11:39:58] [message] alsa_open_r: opening default at 8000Hz, bits=16, stereo=0 [20120602-11:39:58] [warning] alsa_set_params: periodsize:256 Using 256 [20120602-11:39:58] [warning] alsa_set_params: period:8 Using 8 [20120602-11:39:58] [message] alsa_open_r: Audio params set [20120602-11:39:58] [message] ms_ticker_set_time_func: ticker updated. [20120602-11:39:58] [warning] Getting reference signal but no echo to synchronize on. [20120602-11:39:58] [warning] Not enough ref samples, using zeroes [20120602-11:39:58] [message] alsa_open_w: opening default at 8000Hz, bits=16, stereo=0 [20120602-11:39:58] [warning] alsa_set_params: periodsize:256 Using 256 [20120602-11:39:58] [warning] alsa_set_params: period:8 Using 8 [20120602-11:39:58] [message] msv4l2_thread exited. [20120602-11:39:58] [message] msv4l2 thread has joined. [20120602-11:39:58] [message] ms_filter_unlink: MSV4L2Capture:0x2779080,0-->MSPixConv:0x279dfb0,0 [20120602-11:39:58] [message] ms_filter_unlink: MSPixConv:0x279dfb0,0-->MSX11Video:0x27a5b90,0 [20120602-11:39:58] [message] alsa_open_w: Audio params set [20120602-11:39:58] [message] Video MSTicker thread exiting [20120602-11:39:58] [warning] No valid video stream defined. [20120602-11:39:58] [message] Call 0x27e0440: moving from state LinphoneCallConnected to LinphoneCallStreamsRunning [20120602-11:39:58] [message] "nfon.net"/XXX authentication works. [20120602-11:39:58] [message] Samples are back. [20120602-11:39:58] [warning] Not enough ref samples, using zeroes [20120602-11:39:58] [message] Samples are back. [20120602-11:39:59] [message] bandwidth usage: audio=[d=80.9,u=81.1] video=[d=0.0,u=0.0] kbit/sec [20120602-11:39:59] [message] Thread processing load: audio=5.457751 video=0.000000 [20120602-11:39:59] [warning] Not enough ref samples, using zeroes [20120602-11:39:59] [message] Samples are back. [20120602-11:40:00] [message] bandwidth usage: audio=[d=82.3,u=80.8] video=[d=0.0,u=0.0] kbit/sec [20120602-11:40:00] [message] Thread processing load: audio=4.372615 video=0.000000 [20120602-11:40:00] [message] Authentication info for username [XXX], id[XXX], realm ["nfon.net"] added to eXosip [20120602-11:40:00] [message] INFO: authinfo: "nfon.net" "nfon.net" [20120602-11:40:00] [message] allocating transaction ressource 7 2076829155 [20120602-11:40:00] [message] allocating NICT context [20120602-11:40:00] [message] DNS resolution with 109.68.96.128:5060 [20120602-11:40:00] [message] getaddrinfo returned the following addresses: [20120602-11:40:00] [message] 109.68.96.128 port 5060 [20120602-11:40:00] [message] Message sent: (to dest=109.68.96.128:5060) ... =============================================================== ------------------------------------------------------------------------------------ _______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
