Hi, Linphone on Fedora 20 is not able to send REGISTER messages to the proxy server when using ipv6 over TCP. The following is the debug log from the phone. What am i doing wrong here. Any help is appreciated :)
About my setup : 3ffe::100 is my client, 2ffe::a66:b99b is my proxy server (OPENSIPs) linphone-message : Using (r/w) config information from .linphonerc linphone-message : Initializing LinphoneCore 3.6.1 linphone-message : srtp init linphone-message : oRTP-0.22.0 initialized. linphone-message : assigning PCMU/8000 payload type number 0 linphone-message : assigning GSM/8000 payload type number 3 linphone-message : assigning PCMA/8000 payload type number 8 linphone-message : assigning speex/8000 payload type number 110 linphone-message : assigning speex/16000 payload type number 111 linphone-message : assigning speex/32000 payload type number 112 linphone-message : assigning telephone-event/8000 payload type number 101 linphone-message : assigning G722/8000 payload type number 9 linphone-message : assigning GSM/11025 payload type number 96 linphone-message : assigning GSM/22050 payload type number 97 linphone-message : assigning H263/90000 payload type number 34 linphone-message : assigning theora/90000 payload type number 97 linphone-message : assigning H263-1998/90000 payload type number 98 linphone-message : assigning MP4V-ES/90000 payload type number 99 linphone-message : assigning H264/90000 payload type number 102 linphone-message : assigning VP8/90000 payload type number 103 linphone-message : assigning x-snow/90000 payload type number 100 linphone-message : assigning iLBC/8000 payload type number 104 linphone-message : assigning AMR/8000 payload type number 105 linphone-message : assigning AMR-WB/16000 payload type number 106 linphone-message : assigning 1015/8000 payload type number 107 linphone-message : assigning G726-16/8000 payload type number 108 linphone-message : assigning G726-24/8000 payload type number 109 linphone-message : assigning G726-32/8000 payload type number 113 linphone-message : assigning G726-40/8000 payload type number 114 linphone-message : assigning AAL2-G726-16/8000 payload type number 115 linphone-message : assigning AAL2-G726-24/8000 payload type number 116 linphone-message : assigning AAL2-G726-32/8000 payload type number 117 linphone-message : assigning AAL2-G726-40/8000 payload type number 118 linphone-message : assigning SILK/8000 payload type number 119 linphone-message : assigning SILK/12000 payload type number 120 linphone-message : assigning SILK/16000 payload type number 121 linphone-message : assigning SILK/24000 payload type number 122 linphone-message : assigning G729/8000 payload type number 18 linphone-message : assigning mpeg4-generic/22050 payload type number 123 linphone-message : assigning mpeg4-generic/44100 payload type number 124 linphone-message : assigning opus/48000 payload type number 125 linphone-message : assigning 1016/8000 payload type number 1 linphone-message : assigning GSM/8000 payload type number 3 linphone-message : assigning G723/8000 payload type number 4 linphone-message : assigning LPC/8000 payload type number 7 linphone-message : assigning PCMA/8000 payload type number 8 linphone-message : assigning G722/8000 payload type number 9 linphone-message : assigning L16/44100 payload type number 10 linphone-message : assigning L16/44100 payload type number 11 linphone-message : assigning G729/8000 payload type number 18 linphone-message : assigning H261/90000 payload type number 31 linphone-message : assigning MPV/90000 payload type number 32 linphone-message : assigning H263/90000 payload type number 34 linphone-message : Mediastreamer2 2.9.1 (git: 2.9.0-7-g51d3c20) starting. linphone-message : ms_base_init() done linphone-message : Registering all soundcard handlers linphone-message : Card 'ALSA: default device' added linphone-message : Card 'PulseAudio: default' added linphone-message : New PulseAudio context state: PA_CONTEXT_CONNECTING linphone-message : Registering all webcam handlers linphone-message : Webcam StaticImage: Static picture added linphone-message : ms_voip_init() done linphone-message : Loading ms plugins from [/usr/lib64/mediastreamer/plugins] linphone-message : Cannot open directory /usr/lib64/mediastreamer/plugins: No such file or directory linphone-message : Cannot open directory /usr/lib/liblinphone/plugins: No suDEBUG: [get_output_if] connect: Network is unreachable ch file or directory linphone-message : linphone_core_set_playback_gain_db(): no active call. linphone-message : linphone_core_set_mic_gain_db(): no active call. linphone-message : Could not find encoder for 1016 linphone-message : Could not find decoder for 1016 linphone-message : Could not find encoder for G723 linphone-message : Could not find decoder for G723 linphone-message : Could not find encoder for LPC linphone-message : Could not find decoder for LPC linphone-message : Could not find encoder for G729 linphone-message : Could not find decoder for G729 linphone-message : Could not find encoder for telephone-event linphone-message : Could not find decoder for telephone-event linphone-message : Could not find encoder for iLBC linphone-message : Could not find decoder for iLBC linphone-message : Could not find encoder for AMR linphone-message : Could not find decoder for AMR linphone-message : Could not find encoder for AMR-WB linphone-message : Could not find decoder for AMR-WB linphone-message : Could not find encoder for 1015 linphone-message : Could not find decoder for 1015 linphone-message : Could not find encoder for SILK linphone-message : Could not find decoder for SILK linphone-message : Could not find encoder for SILK linphone-message : Could not find decoder for SILK linphone-message : Could not find encoder for SILK linphone-message : Could not find decoder for SILK linphone-message : Could not find encoder for SILK linphone-message : Could not find decoder for SILK linphone-message : Could not find encoder for mpeg4-generic linphone-message : Could not find decoder for mpeg4-generic linphone-message : Could not find encoder for mpeg4-generic linphone-message : Could not find decoder for mpeg4-generic linphone-message : Could not find encoder for H261 linphone-message : Could not find decoder for H261 linphone-message : Could not find encoder for MPV linphone-message : Could not find decoder for MPV linphone-message : Could not find encoder for H263 linphone-message : Could not find decoder for H263 linphone-message : Could not find encoder for H263-1998 linphone-message : Could not find decoder for H263-1998 linphone-message : Could not find encoder for MP4V-ES linphone-message : Could not find decoder for MP4V-ES linphone-message : Could not find encoder for x-snow linphone-message : Could not find decoder for x-snow linphone-message : Could not find encoder for H264 linphone-message : Could not find decoder for H264 linphone-message : DNS resolution with ::0:5060 linphone-message : getaddrinfo returned the following addresses: linphone-message : :: port 5060 linphone-message : eXosip: Reseting timer to 10s before waking up! linphone-message : New PulseAudio context state: PA_CONTEXT_AUTHORIZING linphone-message : New PulseAudio context state: PA_CONTEXT_SETTING_NAME linphone-message : New PulseAudio context state: PA_CONTEXT_READY linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : New local ip address is 3ffe::100 linphone-message : Network state is now [UP] linphone-message : Local interface to reach 2ffe::a66:b99b is 3ffe::100. linphone-message : allocating transaction ressource 1 866090873 linphone-message : allocating NICT context linphone-message : DNS resolution with 2ffe::a66:b99b:5060 linphone-message : getaddrinfo returned the following addresses: linphone-message : 2ffe::a66:b99b port 5060 linphone-message : New binding with 2ffe::a66:b99b:5060 linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress linphone-message : cb_sndregister (id=1) linphone-message : keep alive: 0 linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress linphone-message : eXosip: timer sec:0 usec:509938! linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22] linphone-message : DNS resolution with 2ffe::a66:b99b:5060 linphone-message : getaddrinfo returned the following addresses: linphone-message : 2ffe::a66:b99b port 5060 linphone-message : New binding with 2ffe::a66:b99b:5060 linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress linphone-message : keep alive: 1 linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress linphone-message : eXosip: timer sec:1 usec:10000! linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22] linphone-message : DNS resolution with 2ffe::a66:b99b:5060 linphone-message : getaddrinfo returned the following addresses: linphone-message : 2ffe::a66:b99b port 5060 linphone-message : New binding with 2ffe::a66:b99b:5060 linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress linphone-message : keep alive: 1 linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress linphone-message : eXosip: timer sec:2 usec:10000! linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22] linphone-message : DNS resolution with 2ffe::a66:b99b:5060 linphone-message : getaddrinfo returned the following addresses: linphone-message : 2ffe::a66:b99b port 5060 linphone-message : New binding with 2ffe::a66:b99b:5060 linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress linphone-message : keep alive: 2 linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress linphone-message : eXosip: timer sec:4 usec:10000! linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22] linphone-message : DNS resolution with 2ffe::a66:b99b:5060 linphone-message : getaddrinfo returned the following addresses: linphone-message : 2ffe::a66:b99b port 5060 linphone-message : New binding with 2ffe::a66:b99b:5060 linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress linphone-message : keep alive: 4 linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress linphone-message : eXosip: timer sec:4 usec:10000! linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : _tcp_tl_check_connected: Cannot connect socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], family:10, Invalid argument[22] linphone-message : DNS resolution with 2ffe::a66:b99b:5060 linphone-message : getaddrinfo returned the following addresses: linphone-message : 2ffe::a66:b99b port 5060 linphone-message : New binding with 2ffe::a66:b99b:5060 linphone-message : socket node:2ffe::a66:b99b , socket 25, family:10 set to non blocking mode linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], family:10, in progress linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : socket node:2ffe::a66:b99b, socket 25 [pos=0], in progress linphone-message : cb_transport_error (id=1) linphone-message : cb_nict_kill_transaction (id=1) linphone-message : keep alive: 4 linphone-message : Cannot connect socket node / select timeout (0 ms) linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060, socket 25 [pos=0], in progress linphone-message : eXosip: Reseting timer to 10s before waking up! linphone-message : linphone process event get a message 2 linphone-message : REGISTRATION_FAILURE linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : keep alive: 10 linphone-message : tcp_tl_keepalive socket node:2ffe::a66:b99b:5060 , socket 25 [pos=0], connected linphone-message : eXosip: Reseting timer to 10s before waking up! linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : Local interface to reach 2a00:1450:8002::68 is 3ffe::100. linphone-message : keep alive: 10
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
