Thank you, but all this is quite over my head! John. 2016-08-07 13:31 GMT+02:00 Ralf Schenk <[email protected]>:
> Hello, > > I'm using freeswitch and I'm experimenting with different hard- and > softphones. I like the features of Linphone esp. regarding codec-support > and easy way to also call sip-URL. All my softphones and hardware > (Fritz-Box, Mitel OCX320 PBX as SIP-Client) can call each other inbound and > outbound. With Linphone I only can do outbound calls, Codecs are ngotiated > according to my preferences. No calls can be received. > > This is the same for Linphone on Windows and Android. Here is a log > (Linphone on Windows) which perhaps can show the problems. The call is not > accepted (488) because the codecs don't match which is not understandable. > > IP's are anonymized, the switch is on Public IP and the phones connect > from internal network (routed, no NAT involved). > > SIP/2.0 100 Trying > Via: SIP/2.0/TLS 123.123.123.123:5081;rport;branch=z9hG4bKBp878UrQZD83Q > From: "1010" <sip:[email protected]> <sip:[email protected]>;tag= > j3ZK907Q034Ue > To: <sip:[email protected]:60666;transport=tls> > <sip:[email protected]:60666;transport=tls> > Call-ID: 4c4b9e43-d733-1234-c2ae-00505685f286 > CSeq: 94948245 INVITE > Content-Length: 0 > > message: 2016-08-07 13:16:37:085 New server dialog [05834550] , local tag > [OzFMwZO], remote tag [j3ZK907Q034Ue] > message: 2016-08-07 13:16:37:085 op [05D41280] : set_or_update_dialog() > current=[00000000] new=[05834550] > message: 2016-08-07 13:16:37:085 new incoming call from ["1010" > <sip:[email protected]> <sip:[email protected]>] to [ > <sip:[email protected]:60666;transport=tls> > <sip:[email protected]:60666;transport=tls>] > message: 2016-08-07 13:16:37:087 Found payload G722/8000 fmtp= > message: 2016-08-07 13:16:37:087 Found payload PCMA/8000 fmtp= > message: 2016-08-07 13:16:37:087 Found payload PCMU/8000 fmtp= > message: 2016-08-07 13:16:37:087 Found payload telephone-event/8000 > fmtp=0-16 > error: 2016-08-07 13:16:37:087 Unsupported crypto suite > 'AEAD_AES_256_GCM_8' with parameters '' > warning: 2016-08-07 13:16:37:087 Failed to parse crypto-algo: > 'AEAD_AES_256_GCM_8' > error: 2016-08-07 13:16:37:087 Unsupported crypto suite > 'AEAD_AES_128_GCM_8' with parameters '' > warning: 2016-08-07 13:16:37:087 Failed to parse crypto-algo: > 'AEAD_AES_128_GCM_8' > error: 2016-08-07 13:16:37:087 Unsupported crypto suite > 'AES_CM_256_HMAC_SHA1_80' with parameters '' > warning: 2016-08-07 13:16:37:087 Failed to parse crypto-algo: > 'AES_CM_256_HMAC_SHA1_80' > error: 2016-08-07 13:16:37:087 Unsupported crypto suite > 'AES_CM_192_HMAC_SHA1_80' with parameters '' > warning: 2016-08-07 13:16:37:087 Failed to parse crypto-algo: > 'AES_CM_192_HMAC_SHA1_80' > message: 2016-08-07 13:16:37:087 Found valid crypto line (tag:5 > algo:'AES_CM_128_HMAC_SHA1_80' key:'2x/OM3jI9/967s/ > 9XuHss4BlRDDtTI/r+DDELEKl' > error: 2016-08-07 13:16:37:087 Unsupported crypto suite > 'AES_CM_256_HMAC_SHA1_32' with parameters '' > warning: 2016-08-07 13:16:37:087 Failed to parse crypto-algo: > 'AES_CM_256_HMAC_SHA1_32' > error: 2016-08-07 13:16:37:087 Unsupported crypto suite > 'AES_CM_192_HMAC_SHA1_32' with parameters '' > warning: 2016-08-07 13:16:37:087 Failed to parse crypto-algo: > 'AES_CM_192_HMAC_SHA1_32' > message: 2016-08-07 13:16:37:087 Found valid crypto line (tag:8 > algo:'AES_CM_128_HMAC_SHA1_32' key:'TJuCy3TKxyCDIwUjctk3FdJbfOhua6 > ZmFRBui2C3' > error: 2016-08-07 13:16:37:087 Unsupported crypto suite > 'AES_CM_128_NULL_AUTH' with parameters '' > warning: 2016-08-07 13:16:37:087 Failed to parse crypto-algo: > 'AES_CM_128_NULL_AUTH' > message: 2016-08-07 13:16:37:087 Found: 2 valid crypto lines > message: 2016-08-07 13:16:37:087 Found payload G722/8000 fmtp= > message: 2016-08-07 13:16:37:087 Found payload PCMA/8000 fmtp= > message: 2016-08-07 13:16:37:087 Found payload PCMU/8000 fmtp= > message: 2016-08-07 13:16:37:087 Found payload telephone-event/8000 > fmtp=0-16 > message: 2016-08-07 13:16:37:088 Searching for already_a_call_with_remote_ > address. > message: 2016-08-07 13:16:37:088 New LinphoneCall [05D6B488] initialized > (LinphoneCore version: 3.9.1-1647-g25d2ac5) > message: 2016-08-07 13:16:37:088 audio stream index found: 0, updating > main audio stream index > message: 2016-08-07 13:16:37:088 audio stream index found: 1, but main > audio stream already set to 0 > message: 2016-08-07 13:16:37:088 1 was used for video stream ; now using 3 > message: 2016-08-07 13:16:37:088 check OS support for qwave.lib > error: 2016-08-07 13:16:37:089 QOSAddSocketToFlow failed to add a flow > with error 87 > message: 2016-08-07 13:16:37:089 RtpSession bound to [0.0.0.0] ports > [7078] [7079] > message: 2016-08-07 13:16:37:089 > rtp_session_enable_network_simulation:DISABLING > NETWORK SIMULATION > message: 2016-08-07 13:16:37:089 Configured srtp crypto suite: > AES_CM_128_HMAC_SHA1_80 > message: 2016-08-07 13:16:37:089 Configured srtp crypto suite: > AES_CM_128_HMAC_SHA1_32 > message: 2016-08-07 13:16:37:089 Configured srtp crypto suite: > AES_256_CM_HMAC_SHA1_80 > message: 2016-08-07 13:16:37:089 Configured srtp crypto suite: > AES_256_CM_HMAC_SHA1_32 > message: 2016-08-07 13:16:37:089 Creating ZRTP engine on rtp session > [05897518] ssrc 0xe4cea744 > message: 2016-08-07 13:16:37:090 Setting DSCP to 46 for MSAudio stream. > message: 2016-08-07 13:16:37:090 Equalizer location: hp > message: 2016-08-07 13:16:37:090 cannot set noise gate mode to [0] because > no volume send > message: 2016-08-07 13:16:37:090 Cannot determine multicast role for > stream type [video] on call [05D6B488] > message: 2016-08-07 13:16:37:090 check OS support for qwave.lib > error: 2016-08-07 13:16:37:091 QOSAddSocketToFlow failed to add a flow > with error 87 > message: 2016-08-07 13:16:37:091 RtpSession bound to [0.0.0.0] ports > [51346] [51347] > message: 2016-08-07 13:16:37:091 > rtp_session_enable_network_simulation:DISABLING > NETWORK SIMULATION > message: 2016-08-07 13:16:37:091 Initializing multistream ZRTP context on > rtp session [05899D58] ssrc 0x8fd525b > message: 2016-08-07 13:16:37:091 Setting DSCP to 0 for MSVideo stream. > message: 2016-08-07 13:16:37:091 Cannot determine multicast role for > stream type [text] on call [05D6B488] > message: 2016-08-07 13:16:37:091 check OS support for qwave.lib > error: 2016-08-07 13:16:37:091 QOSAddSocketToFlow failed to add a flow > with error 87 > message: 2016-08-07 13:16:37:091 RtpSession bound to [0.0.0.0] ports > [11078] [11079] > message: 2016-08-07 13:16:37:091 > rtp_session_enable_network_simulation:DISABLING > NETWORK SIMULATION > message: 2016-08-07 13:16:37:131 Discovered mtu is 1500, RTP payload max > size is 1440 > message: 2016-08-07 13:16:37:131 Don't put video stream on local offer for > call [05D6B488] > message: 2016-08-07 13:16:37:131 Don't put text stream on local offer for > call [05D6B488] > message: 2016-08-07 13:16:37:131 Doing SDP offer/answer process of type > incoming > message: 2016-08-07 13:16:37:131 Declining mline 0, no corresponding > stream in local capabilities description. > message: 2016-08-07 13:16:37:131 No match for G722/8000/1 > message: 2016-08-07 13:16:37:131 No match for PCMA/8000/1 > message: 2016-08-07 13:16:37:131 No match for PCMU/8000/1 > message: 2016-08-07 13:16:37:131 No match for telephone-event/8000/1 > message: 2016-08-07 13:16:37:131 channel [05882BD0]: message sent to > [TLS://mydomain.com:5081], size: [393] bytes > SIP/2.0 488 Not acceptable here > > Via: SIP/2.0/TLS 123.123.123.123:5081;rport;branch=z9hG4bKBp878UrQZD83Q > From: "1010" <sip:[email protected]> <sip:[email protected]>;tag= > j3ZK907Q034Ue > To: <sip:[email protected]:60666;transport=tls> > <sip:[email protected]:60666;transport=tls>;tag=OzFMwZO > Call-ID: 4c4b9e43-d733-1234-c2ae-00505685f286 > CSeq: 94948245 INVITE > User-Agent: Linphone/3.9.1 (belle-sip/1.4.2) > Supported: replaces, outbound > Content-Length: 0 > -- > > > *Ralf Schenk* > fon +49 (0) 24 05 / 40 83 70 > fax +49 (0) 24 05 / 40 83 759 > mail *[email protected]* <[email protected]> > > *Databay AG* > Jens-Otto-Krag-Straße 11 > D-52146 Würselen > *www.databay.de* <http://www.databay.de> > > Sitz/Amtsgericht Aachen • HRB:8437 • USt-IdNr.: DE 210844202 > Vorstand: Ralf Schenk, Dipl.-Ing. Jens Conze, Aresch Yavari, Dipl.-Kfm. > Philipp Hermanns > Aufsichtsratsvorsitzender: Klaus Scholzen (RA) > ------------------------------ > > _______________________________________________ > Linphone-users mailing list > [email protected] > https://lists.nongnu.org/mailman/listinfo/linphone-users > >
_______________________________________________ Linphone-users mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/linphone-users
