I do not have a Linphone account & don't need to keep receiving your emails.
Please remove me from your mailing list.
--
Sent with Tutanota, enjoy secure & ad-free emails.
Sep 15, 2022, 13:09 by fli...@gmail.com:
> Thanks, Lorenzo.
>
> Tech support over at Callcentric was kind enough to check into it a little
> for me and pointed out that SIP Broker has flagged the proxy code (*8954) as
> failing. So, it looks like the > linphone.org <http://linphone.org>> domain
> is not accepting inbound calls. If that's the case, there's nothing we
> retail users can do about that. That would be up to tech support at linphone
> to resolve.
>
> Appreciated the response,
>
> -- Paul.
>
> On Thu, Sep 15, 2022 at 2:57 PM Lorenzo Corgiat Mecio <>
> lorenzocorg...@gmail.com> > wrote:
>
>> Hi Paul,
>>
>> I am facing a similar issue.
>> I was using Cisco spa303 on linphone.
>> It has been working fine since about two weeks ago when I stopped
>> getting incoming calls as well on all my hardphones.
>> I DID NOT change anything on the network or phone configuration.
>> I also tried other networks and fresh factory-reset phones with
>> different software versions without luck.
>> Devices register fine and can make calls.
>> For experiment I setted up a classic vintage Grandstream 2000 phone
>> and that seems to work.
>> I say it seems because calls take ages to get through. I mean, I call
>> and the receiving phone can sometimes take 10 seconds to start
>> ringing.
>> Other SIP providers are working fine with both setups and calls are
>> incoming in less than a second as usual.
>> I opened a topic here a few days ago but no answers so far...
>> I get on the phone I am calling from "User hasn't been found".
>> Settings are UDP.
>>
>> Thank you
>>
>> Skinoku
>>
>> Il giorno gio 15 set 2022 alle ore 19:34 Paul Flint <>> fli...@gmail.com>> >
>> ha scritto:
>> >
>> > Hi, Newbie here, long time user of Obihai ATAs, used to doing my own
>> setup.
>> >
>> > Here's a problem I can't seem to solve:
>> >
>> > I set up a Service Provider and Voice Service for a new Linphone account
>> on an Obi 200. It registers fine and I can initiate SIP calls to Voip.ms,
>> callcentric, and SIPBroker.
>> >
>> > I can't call it, though. I get 403 and 404 errors from >> voip.ms
>> <http://voip.ms>>> , callcentric, and 2 different ways from SIPBroker: a)
>> using the **275 route from callcentric, and b) dialing from a PSTN line (in
>> both cases using the *8954 proxy code for linphone).
>> >
>> > When dialing from an Obi 202, I put the URI in a speed dial slot.
>> >
>> > So, am I an idiot and missing something obvious, or is something subtle
>> going on?
>> >
>> > Thanks in advance.
>> >
>> > -- Paul.
>> > _______________________________________________
>> > Linphone-users mailing list
>> > >> Linphone-users@nongnu.org
>> > >> https://lists.nongnu.org/mailman/listinfo/linphone-users
>>
>> _______________________________________________
>> Linphone-users mailing list
>> >> Linphone-users@nongnu.org
>> >> https://lists.nongnu.org/mailman/listinfo/linphone-users
>>
_______________________________________________
Linphone-users mailing list
Linphone-users@nongnu.org
https://lists.nongnu.org/mailman/listinfo/linphone-users
