# [linrad] Linrad, MAP65, and SDR-IQ

```Hi Leif and all,

```
I have been thinking about ways to make MAP65 available to those using the SDR-IQ (or SDR-14). Last evening I re-read your very informative email of July 2 to Fletch, K3JYD.
```
```
As I understand it, the SDR-IQ always samples at 66.6667 MHz at its input. Its on-board AD6220 digital down-converter divides the sample rate by a number N that is the product of three integers: CIC2 * CIC5 * RCF. By reading the AD6620 spec sheet I find that CIC2 must be in the range 2-16, CIC5 and RCF in the range 1-32. I think Linrad allows one to choose these integers, and I understand that some trade-offs concerning location and attenuation of spurs will be involved in the choice.
```
MAP65 presently requires an input sample rate of 96000 Hz.

The ratios 66,666,667/694 = 96061.48... and
```
66,666,667/695 = 95923.26... are probably "close enough", but they are not usable because 694 = 2 * 347 and 695 = 5 * 139, and both 347 and 139 are prime.
```
```
So it seems that to provide a usable bandwidth of about 90 kHz with the SDR-IQ, MAP65 must provide an option to use input data sampled at some new rate commensurate with 66.6667 MHz, with an integer divisor somewhere around 700. The divisor must be factorable into three integers 32 or smaller.
```
```
Several good possibilities for the divisor, and their factors, would seem to be:
```
684: 2 2 3 3 19      ==> 19*6*6, 19*9*4
690: 2 3 5 23        ==> 23*5*6, 23*10*3
693: 3 3 7 11        ==> 11*9*7
696: 2 2 2 3 29      ==> 29*8*3, 29*6*4
700: 2 2 5 5 7       ==> 10*10*7
702: 2 3 3 3 13      ==> 13*9*6
704: 2 2 2 2 2 2 11  ==> 11*8*8
714: 2 3 7 17        ==> 17*7*6
715: 5 11 13         ==> 13*11*5

```
Am I thinking about this correctly? Is the present Linrad set up so that it can command the SDR-IQ to do these things?
```
-- 73, Joe, K1JT

#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@antennspecialisten.se>.
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]>
Send administrative queries to  <[EMAIL PROTECTED]>

```