At 10:38 AM 1/23/2007 +0100, Leif Asbrink wrote: > >Hi All, > >This message appeared on moon-net: > >> I just received my SDR-IQ receiver and intend to use it in a 1296 MHz >> EME system with a DEMI 1296/28 transceiver. I will be using the >> SpectraVue software and I am interested in knowing the software >> configuration other EMEs might be using with their SDR-IQ unit or >> currently using with the SDR-14 receiver. > >As members on this list might guess I think Linrad would serve >better for finding and working weak signals. I can not suggest >this on moon-net however, because I do not know if Linrad works >for the SDR-IQ. It could differ from the SDR-14. Is there anyone >who tried? > > 73 > > Leif
Leif, I have downloaded the windows vers wlr2-20 to try out on my SDR-IQ. Spectravue provides two dll (for SDR-14 & SDR-IQ) so do not know if these will be supported by Linrad. When I run linrad it asks for the soundcard to run, then expresses hardware error asking for data speed. I do not know how to get it to recognize the USB input. 73's, Ed - KL7UW ========================================= http://www.qsl.net/al7eb - BP40iq 144-EME: FT-847, mgf-1801, 4xM2-xpol-20, 185w (QRV) 432-EME: Not QRV USA Rep. for Dubus Magazine: [EMAIL PROTECTED] ========================================= ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>