original had a screen grab so I deleted it.
Hello The Net:
Trying to get a master and a slave computer working on a simple network.
LinRad receive only. (NO TX at this time).
Master computer is at the receiver in the shack, Win XP sp2
HP Pavilion, 100 base network activated, 2 GHz Celeron, 256MB RAM
Start WLR2-25 and set N, network parameters to:
1, base port = 50050
2, send address = 239.255.0.0
3. receive address = 239.255.0.0
4. send raw data in 16 bit format ON (port 50050)
(changes color to yellow ! )
5 thru 10 OFF
exit network setup and save with a W
toggle R for network input
(does this enable RAW16 data input into the network ?? )
go to mode A for weak signals and verify it is working with a test tone.
All OK, but I see NO network activity,
I would expect to see streaming data in one direction, at least.
Slave computer in the auxiliary shack, Win XP sp2
ASUS 2.4 Ghz Pent4, 1 GB RAM, 100 base network activated
start WLR2-25 and set N parameters to:
1. base port = 50050
2. send address = 239.255.0.0
3. receive address = 239.255.0.0
4 thru 9 all set to OFF
10, RX input from network ON raw data 16 bit
exit network setup save N setup with a W
At the WLR2-25 startup page, toggle T for NETSEND
(as indicated in the upper left in red.)
Mode A for weak signals,
I get displayed:
listening to network for RAW16 RX input
Group 239.255.0.0, port 50050
When I try to X for exit, I get
internal error 1269
[1269] waiting for master was interrupted from keyboard
press any key
pressing any key dumps me out of Linrad
My setup does NOT work.
What do I need to change ?
How do I verify network activity to be sure I am streaming data from the
master to the slave ?
Never an indication data is streaming at the master or the slave.
On the main WLR2-25 screen, R = toggle network input,
I enable this to extract RAW16 data off of the network, into the Linrad
(slave) application ?
The attached file grab01 is the master computer mode A (weak signals)
detailed setup. deleted, server could only accept text no .jpg attachments.
I appreciate your help.
Stan, W1LE
#############################################################
This message is sent to you because you are subscribed to
the mailing list <linrad@antennspecialisten.se>.
To unsubscribe, E-mail to: <[EMAIL PROTECTED]>
To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]>
To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]>
Send administrative queries to <[EMAIL PROTECTED]>
