Hi Francesco, > due some pc problem i have reinstalled UBUNTU 6.10 and Linrad (02.27). > All is ok, except for the calibration. > Although i have the couple of dsp_wc and dsp_wcw files, when i start i > read "FILTER NOT CALIBRATED". > I don't know why but i have had the same problem, at the begining, with > first installation. > Any suggestion? I have done some major changes to the calibration routines recently. I do not quite remember, but there are errors in the calibration routines in recent Linrad versions. In 02-28, you have to remove some fprintf(dmp,".... statements or allow the DUMPFILE in options.h
Linrad versions 02-18 to 02-27, have a common error in the D=Refine amplitude.... function which should not be used with these versions. Just skip it and use the somewhat larger calibration file that is obtained as the output of the C=Remove center discontinuity function. (Which has a bug in 02-27 and 02-28 that makes it not work in case the fft1 size is much different from "normal" (whatever I used when testing) Linrad-02.29 will hopefully have properly working calibration routines. (Both faster and more accurate than before.) I am holding the upload because I am waiting for feedback on the SDR-IQ which I hope will work properly with this version. In the meantime I suggest you try to use 02-17 or 02-28 (with DUMPFILE in options.h) for generating the calibration files. Sorry for the inconvenience. 73 Leif / SM5BSZ ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>
