Hello Joe, Maybe your Linrad version is very old? The current version is 02-34.
The freq control box was originaly intended for controlling the frequency of the hardware. The standard package supports the WSE units and the SDR-14 and users with other hardwares were supposed to add their own users_hwaredriver to set the frequency of other hardwares. With this intended usage, the frequency control box was only displayed when there was some hardware present (and properly set-up) The frequency control box will not only affect the hardware, it will also change the frequency scales, and someone asked me to allow it always. Therefore it should be present always in recent versions. If you use Linux you have to set the parallel port to whatever value your computer uses (PC COM1 is usually 888) and if you do not, the freq control box would not appear in old Linrad versions. In case the freq control box does not re-appear when you make a test with Linrad-02.34 there is something unexpected going on and if it happens, please pack all par* files and send them to me. There might be something that I do no longer remember..... The box should always be there:-) 73 Leif / SM5BSZ > Having finished the building of a new 4 x 14 xpol EME antenna, I > have now turned to completing the task of reconfiguring my > station. > > After 6 months of not using Linrad, my old brain seems > befuddled. The box that one clicks to increase/decrease > frequency by 25 kHz steps -- it controls the crystal oscillators > in the WSE converters -- has disappeared from my Linrad screen. > What have I mistakenly done, when re-connecting and restarting > things, to make this box disappear? How do I get it back? Can > anyone shed some light on this for me? > > -- 73, Joe, K1JT > > ############################################################# > This message is sent to you because you are subscribed to > the mailing list <linrad@antennspecialisten.se>. > To unsubscribe, E-mail to: <[EMAIL PROTECTED]> > To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> > To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> > Send administrative queries to <[EMAIL PROTECTED]> > ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@antennspecialisten.se>. To unsubscribe, E-mail to: <[EMAIL PROTECTED]> To switch to the DIGEST mode, E-mail to <[EMAIL PROTECTED]> To switch to the INDEX mode, E-mail to <[EMAIL PROTECTED]> Send administrative queries to <[EMAIL PROTECTED]>