j'ouvre un nouveau fil, j'ai fait cette allusion à ce disque ailleurs:
"Il se trouve que c'est le disque qui fait hurler smart dont je
t'avais parlé (il tourne comme ca depuis 5 ans!). J'ai lancé badblocks
dessus, pour l'instant rien à signaler mais il n'est qu'à 75% de test"
5 ans c'est une estimation à vue de nez - très longtemps!
ci-dessous le résultat de smart. j'avais exécuté des tests extensifs à
l'époque. Actuellement, au boot, le bios HP m'insulte en disant que je
dois changer le disque :-) :-)
jdd
smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (SUSE RPM)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Maxtor DiamondMax Plus 9 family
Device Model: Maxtor 6Y120L0
Serial Number: Y320S47E
Firmware Version: YAR41BW0
User Capacity: 122 942 324 736 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Sat Apr 30 17:07:15 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 64) The previous self-test
completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 242) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 204 202 063 Pre-fail
Always - 13694
4 Start_Stop_Count 0x0032 253 253 000 Old_age
Always - 517
5 Reallocated_Sector_Ct 0x0033 010 010 063 Pre-fail
Always FAILING_NOW 2460
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail
Offline - 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age
Always - 0
8 Seek_Time_Performance 0x0027 252 246 187 Pre-fail
Always - 46670
9 Power_On_Minutes 0x0032 246 246 000 Old_age
Always - 351h+04m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 251 251 000 Old_age
Always - 1125
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age
Always - 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age
Always - 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age
Always - 43
195 Hardware_ECC_Recovered 0x000a 253 251 000 Old_age
Always - 4919
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age
Offline - 0
197 Current_Pending_Sector 0x0008 253 247 000 Old_age
Offline - 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x0008 197 195 000 Old_age
Offline - 4
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age
Always - 0
201 Soft_Read_Error_Rate 0x000a 253 060 000 Old_age
Always - 0
202 Data_Address_Mark_Errs 0x000a 253 001 000 Old_age
Always - 0
203 Run_Out_Cancel 0x000b 253 243 180 Pre-fail
Always - 0
204 Soft_ECC_Correction 0x000a 253 121 000 Old_age
Always - 0
205 Thermal_Asperity_Rate 0x000a 253 252 000 Old_age
Always - 0
207 Spin_High_Current 0x002a 253 252 000 Old_age
Always - 0
208 Spin_Buzz 0x002a 253 252 000 Old_age
Always - 0
209 Offline_Seek_Performnce 0x0024 194 190 000 Old_age
Offline - 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age
Offline - 0
SMART Error Log Version: 1
Warning: ATA error count 2031 inconsistent with error log pointer 5
ATA Error Count: 2031 (device log contains only the most recent five
errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2031 occurred at disk power-on lifetime: 2375 hours (98 days +
23 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 16 56 e4 f7 00 00:12:50.160 WRITE DMA
ca 00 80 eb cf 10 f9 00 00:12:49.904 WRITE DMA
ca 00 80 6b cf 10 f9 00 00:12:49.904 WRITE DMA
ca 00 80 eb ce 10 f9 00 00:12:49.904 WRITE DMA
ca 00 80 6b ce 10 f9 00 00:12:49.888 WRITE DMA
Error 2030 occurred at disk power-on lifetime: 2375 hours (98 days +
23 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 16 56 e4 f7 00 00:12:49.728 WRITE DMA
ca 00 80 6b be 10 f9 00 00:12:49.728 WRITE DMA
ca 00 80 eb bd 10 f9 00 00:12:49.728 WRITE DMA
ca 00 80 6b bd 10 f9 00 00:12:49.728 WRITE DMA
ca 00 80 eb bc 10 f9 00 00:12:49.728 WRITE DMA
Error 2029 occurred at disk power-on lifetime: 2375 hours (98 days +
23 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 16 56 e4 f7 00 00:12:49.296 WRITE DMA
ca 00 80 6b 92 10 f9 00 00:12:48.992 WRITE DMA
ca 00 80 eb 91 10 f9 00 00:12:48.992 WRITE DMA
ca 00 80 6b 91 10 f9 00 00:12:48.992 WRITE DMA
ca 00 80 eb 90 10 f9 00 00:12:48.992 WRITE DMA
Error 2028 occurred at disk power-on lifetime: 2375 hours (98 days +
23 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 56 56 e4 f7 Error: ICRC, ABRT at LBA = 0x07e45656 = 132404822
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 16 56 e4 f7 00 00:12:48.880 WRITE DMA
ca 00 1b 28 df 2c f9 00 00:12:48.864 WRITE DMA
ca 00 80 96 55 e4 f7 00 00:12:48.864 WRITE DMA
ca 00 60 a5 58 e4 f7 00 00:12:48.864 WRITE DMA
ca 00 80 16 55 e4 f7 00 00:12:48.864 WRITE DMA
Error 2027 occurred at disk power-on lifetime: 2375 hours (98 days +
23 hours)
When the command that caused the error occurred, the device was in
an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 40 e4 32 e4 f7 Error: ICRC, ABRT at LBA = 0x07e432e4 = 132395748
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
ca 00 80 a4 32 e4 f7 00 00:12:47.744 WRITE DMA
e7 00 00 00 00 00 b0 00 00:12:47.472 FLUSH CACHE
c8 00 01 60 b7 b0 fa 00 00:12:47.472 READ DMA
ca 00 80 92 3c e4 f7 00 00:12:47.456 WRITE DMA
ca 00 80 12 3c e4 f7 00 00:12:47.456 WRITE DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed: unknown failure 00% 2375
0
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute
delay.
--
Jean-Daniel Dodin
-----------------------------------------------------------------
Les listes de diffusion du CULTe - Pour une informatique libre
http://www.CULTe.org/listes/
Pour se desabonner:
mailto:[email protected]?subject=Cliquez_sur_ENVOYER
