Hi, Several months ago, I configured our Suse 7.0 system to use a OSAD connection. It all worked fine at that time. The system has been inactive for awhile, and now when I bring it up it will not connect to the OSA card. I tried several other addresses, as well as trying it on two other cards, but I still get the same message. I believe the only change is that we switched our z/VM system to a different OSA card. I have also used the card(s) for other z/VM testing. Would this error be related to a change in the port name? Is there a way of changing the setup via the console? I have included the error message at the bottom of this note.
Any help would be appreciated. Thanks, Ken Vance Amadeus ------------------------------------------------------------------------------------------ Setting up network device eth0 loading QDIO base support loading qeth S/390 Gigabit Ethernet driver Trying to use card with devnos 0xBC14/0xBC15/0xBC16 qeth: received an IDX TERMINATE on irq 0x1 with cause code 0x22 -- use another p ortname qeth: There were problems in hard-setting up the card. QDIO base support: module removed insmod: /lib/modules/2.2.16/net/qeth.o: init_module: Device or resource busy insmod: Hint: this error can be caused by incorrect module parameters, including invalid IO or IRQ parameters insmod: /lib/modules/2.2.16/net/qeth.o: insmod eth0 failed SIOCSIFADDR: No such device
