Thanks to all for your responses. I was able to properly code my qeth parameters with the portname and bring up my network with my rescue system. The bad news is, I destroyed my test system doing it (don't ask). What better way to learn :)
Thanks, SG -----Original Message----- From: Post, Mark K [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 18, 2001 5:25 PM To: [EMAIL PROTECTED] Subject: Re: OSA-E and IDX Terminate Sandy, Check out http://www.marist.edu/htbin/wlvtype?LINUX-VM.19856. You have to add an option to your modules.conf parameters for the card after the microcode change. Mark Post -----Original Message----- From: Gelbard, Sandy [mailto:[EMAIL PROTECTED]] Sent: Tuesday, December 18, 2001 4:08 PM To: [EMAIL PROTECTED] Subject: OSA-E and IDX Terminate Hello, I received the following error after the IPL of my Linux LPAR. "Received an IDX Terminate on IRQ 0C44 with cause code 0x22 use another portname." My OSA card is online to the LPAR. I would consider resetting the card, but it's in use by other LPARS. Needless to say, I cannot telnet into the system. Has anyone seen this before ? Are there any manuals which may explain these codes ? Are there any good diagnostics commands to use ? We upgraded our z/Series Driver Level to Driver 38 (microcode) this past weekend. TIA, SG
