I have run into the same problem, it seems that the s390x only recognises the new vtoc type partition table. I reformatted swap under s390x such that the volume has a vtoc, after which both s390 and s390x could use it. Jan Jaeger
"Ferguson, Neale" wrote: > > I have a s390 (2.4.7) system that registers its DASD as shown below. > I now create a s390x (2.4.7) system on X'202' and attempt to use the > existing DASD. Swap is able to use 193, ext2fs is recognized on 200-202. > However, 192 and 290 are not able to be used. The dasd driver claims > they're not ext2fs devices. Is there an update I may be missing here? > > s390: > <6>dasd:Registered successfully to major no 94 > <6>dasd(eckd):ECKD discipline initializing > <6>dasd(eckd):0193 on sch 2: 3390/0C(CU:3990/01) Cyl:500 Head:15 Sec:224 > <6>dasd(eckd):0193 on sch 2: 3390/0C(CU:3990/01): Configuration data read > <6>dasd(eckd):/dev/dasda(94:0),0193@0x2:(4kB blks): 360000kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0192 on sch 1: 3390/0C(CU:3990/01) Cyl:2838 Head:15 Sec:224 > <6>dasd(eckd):0192 on sch 1: 3390/0C(CU:3990/01): Configuration data read > <6>dasd(eckd):0290 on sch 6: 3390/0C(CU:3990/01) Cyl:10016 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasdb(94:4),0192@0x1:(4kB blks): 2043360kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0290 on sch 6: 3390/0C(CU:3990/01): Configuration data read > <6>dasd(eckd):0200 on sch 3: 3390/0C(CU:3990/01) Cyl:3339 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasdc(94:8),0290@0x6:(4kB blks): 7211520kB at 48kB/trk > compatible disk layout > <6>dasd(eckd):0200 on sch 3: 3390/0C(CU:3990/01): Configuration data read > <6>dasd(eckd):0201 on sch 4: 3390/0C(CU:3990/01) Cyl:3339 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasdd(94:12),0200@0x3:(4kB blks): 2404080kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0201 on sch 4: 3390/0C(CU:3990/01): Configuration data read > <6>dasd(eckd):/dev/dasde(94:16),0201@0x4:(4kB blks): 2404080kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0202 on sch 5: 3390/0C(CU:3990/01) Cyl:3339 Head:15 Sec:224 > <6>dasd(eckd):0202 on sch 5: 3390/0C(CU:3990/01): Configuration data read > <6>dasd:waiting for responses... > <6>dasd(eckd):/dev/dasdf(94:20),0202@0x5:(4kB blks): 2404080kB at 48kB/trk > classic disk layout > <6>Partition check: > <6> dasda:CMS1/ 009SWP(MDSK): dasda dasda1 > <6> dasdb:CMS1/ 009BOT(MDSK): dasdb dasdb1 > <6> dasdc:VOL1/ 0X0290: dasdc dasdc1 > <6> dasdd:(nonl)/ 03 : dasdd dasdd1 > <6> dasde:(nonl)/ 04 : dasde dasde1 > <6> dasdf:(nonl)/ 08 : dasdf dasdf1 > > s390x: > <6>dasd:initializing... > <6>debug: reserved 2 areas of 1 pages for debugging dasd > <6>dasd:Registered successfully to major no 94 > <6>dasd(eckd):ECKD discipline initializing > <6>dasd(eckd):0193 on sch 2: 3390/0C(CU:3990/01) Cyl:500 Head:15 Sec:224 > <6>dasd(eckd):0193 on sch 2: 3390/0C(CU:3990/01): Configuration data read > <6>debug: reserved 2 areas of 1 pages for debugging dasda > <6>dasd(eckd):0202 on sch 5: 3390/0C(CU:3990/01) Cyl:3339 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasda(94:0),0193@0x2:(4kB blks): 360000kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0202 on sch 5: 3390/0C(CU:3990/01): Configuration data read > <6>debug: reserved 2 areas of 1 pages for debugging dasdb > <6>dasd(eckd):0200 on sch 3: 3390/0C(CU:3990/01) Cyl:3339 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasdb(94:4),0202@0x5:(4kB blks): 2404080kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0200 on sch 3: 3390/0C(CU:3990/01): Configuration data read > <6>debug: reserved 2 areas of 1 pages for debugging dasdc > <6>dasd(eckd):0201 on sch 4: 3390/0C(CU:3990/01) Cyl:3339 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasdc(94:8),0200@0x3:(4kB blks): 2404080kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0201 on sch 4: 3390/0C(CU:3990/01): Configuration data read > <6>debug: reserved 2 areas of 1 pages for debugging dasdd > <6>dasd(eckd):0192 on sch 1: 3390/0C(CU:3990/01) Cyl:2838 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasdd(94:12),0201@0x4:(4kB blks): 2404080kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0192 on sch 1: 3390/0C(CU:3990/01): Configuration data read > <6>debug: reserved 2 areas of 1 pages for debugging dasde > <6>dasd(eckd):0290 on sch 6: 3390/0C(CU:3990/01) Cyl:10016 Head:15 Sec:224 > <6>dasd(eckd):/dev/dasde(94:16),0192@0x1:(4kB blks): 2043360kB at 48kB/trk > classic disk layout > <6>dasd(eckd):0290 on sch 6: 3390/0C(CU:3990/01): Configuration data read > <6>debug: reserved 2 areas of 1 pages for debugging dasdf > <6>dasd:waiting for responses... > <6>dasd(eckd):/dev/dasdf(94:20),0290@0x6:(4kB blks): 7211520kB at 48kB/trk > compatible disk layout > <6>Partition check: > <6> dasda:CMS1/ 009SWP: dasda dasda1 > <6> dasdb:(nonl)/ 08 : dasdb dasdb1 > <6> dasdc:(nonl)/ 03 : dasdc dasdc1 > <6> dasdd:(nonl)/ 04 : dasdd dasdd1 > <6> dasde:CMS1/ 009BOT: dasde dasde1 > <6> dasdf:VOL1/ 0X0290: dasdf
