version of: initrd - whatever is out on the RH 7.2 /images/tapeinrd.img + I did do the OCO magic kernel - 2.4.9-17BOOTtape rhsetup
I did scrap the process and again try the RH ftp site with a "sniffer". it finally began to work, albeit very slow. Now to figure out what to do when the ftp install ends. Keep reading until then. j-me -----Original Message----- From: Post, Mark K Sent: Thursday, February 14, 2002 4:15 PM To: [EMAIL PROTECTED] Subject: Re: Rh 7.2 ftp install Jammie, Which version of the initrd and kernel are you using? Are you using the "loader" or "rhsetup" installer? Mark Post -----Original Message----- From: Hall, Jammie [mailto:[EMAIL PROTECTED]] Sent: Monday, February 11, 2002 11:52 AM To: [EMAIL PROTECTED] Subject: Rh 7.2 ftp install I finally have the ENTIRE RedHat tree (RedHat - RPMS, base, installer) to my laptop. I am running an ftp server (RH 7.1) on the laptop. I run "rhsetup" via telnet or Putty I get the same results. After telling it the username:password@IP, I begin to see the laptop HD light-up and then on my session here's the results: Mounting filesystems... insmod: a module named loop already exists (this is from running it multiple times) insmod: a module named cramfs already exists (ditto) 5000+0 records in 5000+0 records out mke2fs 1.23, 15-Aug-2001 for EXT2 FS 0.5b, 95/08/09 /dev/ram1 is mounted; mke2fs forced anyway. Hope /etc/mtab is incorrect. mount: /dev/ram1 already mounted or /mnt1 busy mount: according to mtab, /dev/ram1 is already mounted on /mnt1 Downloading Ramdisk.... Getting package information Installing packages... /mnt/sysimage/tmp/: Is a directory Install: error: read failed: Is a directory (21) rm: /mnt/sysimage/tmp: is a directory /mnt/sysimage/tmp/: Is a directory Install: error: read failed: Is a directory (21) rm: /mnt/sysimage/tmp: is a directory /mnt/sysimage/tmp/: Is a directory I'm getting connected but why do I get this message?
