Hi Maciej,

I Ipled the CD of SuSE 7.0, Kernel 2.2.16 from an SE and also from an HMC 
and that part went just fine.

But once IPLed, I had to remove the CD from the reader of the HMC and load 
it someplace else.

One time we did copy all the installation directories to an MVS LPAR under 
USS and used the FTP Server of this MVS LPAR. Ran great.

Another time, at a different account, I used my ThinkPad I booted with the 
CD #1 of this package and used my ThinkPad as a Linux  NFS Server which 
also ran fine.

I think the important point here is that, once the Ramdisk Install Kernel 
is started, the installation directories/files must be accessed from this 
Basic Mode/LPAR Kernel being the client to an appropriate FTP/NFS/SMB 
Server through a network adapter used by this IPLed Kernel.

Hope this helps.

Jean-Pierre Baril
Specialiste en technologies de l'information/IT Specialist 
Novipro Inc / 2055, rue Peel, bureau 701
Montreal (Quebec)   H3A 1V4
Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514) 744-3908 
[EMAIL PROTECTED] / www.novipro.com




Maciej Księżycki <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
2002-02-21 07:19
Please respond to Linux on 390 Port

 
        To:     [EMAIL PROTECTED]
        cc: 
        Subject:        SEW - weird behavior

Hello everybody,

Though my question does not concern Linux directly, the problem occurred 
during Linux installation so I thought I was allowed to ask here anyway...

My SEW (or HMC) is a PC running OS/2 WARP system. I have configured its 
network interfaces (it has two). 
I can connect without any problems to my FTP server where I store my 
RedHat distirbution when using standard OS/2 ftp client. However when I 
try to point that same server to HMC's "Load from CD-ROM or Server --> FTP 
Source" dialog box a message appears which says that the host specified 
cannot be accessed (IQZB106). 
I tried to ping the FTP server from HMC's "Network Configuration" (sorry, 
can't remmeber the exact name of that tool) and it worked. Why the 
installation tool cannot access it ?

Does anyone have a clue what is wrong ?
Any help will be appreciated.

Maciek

------
Maciej Ksiezycki
MVS System Programmer
Unizeto Sp. z o.o. (Poland)
Computing Centre
http://www.unizeto.pl

Reply via email to