On my 2.4.7 SLES7 system, running SuSEconfig doesn't update /etc/route.conf. You'll have to update that as well.
"You do not need a parachute to skydive. You only need a parachute to skydive twice." -Motto of the Darwin Society Gordon W. Wolfe, Ph.D. (425) 865-5940 VM Technical Services, The Boeing Company > ---------- > From: Post, Mark K > Reply To: Linux on 390 Port > Sent: Tuesday, March 12, 2002 1:12 PM > To: [EMAIL PROTECTED] > Subject: Re: Cloning an Image? > > Lionel, > > All the network-related parameters are in /etc/rc.config. Write a sed > script to modify them on the new image, and then run SuSEConfig. You're > done. > > Mark Post > > -----Original Message----- > From: Lionel Dyck [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, March 12, 2002 1:59 PM > To: [EMAIL PROTECTED] > Subject: SAF: Cloning an Image? > > > With z/VM SAF one can use the VMADMIN PARTITION COPY command to copy an > existing partition from one image to another which allows one to copy an > existing image's dasd to a new image. Are there any guidelines on how to > change the network information for the cloned image (suse in this case)? > > -------------------------------------------------------------------- > Lionel B. Dyck, Systems Software Lead > Kaiser Permanente Information Technology > 25 N. Via Monte Ave > Walnut Creek, Ca 94598 > > Phone: (925) 926-5332 (tie line 8/473-5332) > E-Mail: [EMAIL PROTECTED] > Sametime: (use Lotus Notes address) > AIM: lbdyck > >
