Yes, The first message is because you did not specify "dasd=xxx" in your parmfile, which should be file 2 on the tape.
The second message is normal, and can be ignored, unless you defined some escon channels to the partition. The third message sounds like you did not write the ramdisk image out to your tape as the third file. Keep in mind that this _must_ be a non-labeled tape. Mark Post -----Original Message----- From: Rivers, James E. [mailto:[EMAIL PROTECTED]] Sent: Wednesday, April 10, 2002 3:07 PM To: [EMAIL PROTECTED] Subject: LINUX on S390 During IPL from tape received the following messages: (native s390) dasd: 0XXX not enabled due to probeonly mode channel: no channel devices recognized ramdisk: coundn't find valid RAM disk image starting at 0. Can you help?
