Matthias, well, I tried the following: SuSE:/ # insmod qeth qeth_options=noauto,0x35a0,0x35a1,0x35a2;add_parms,0x10,portname:OSAE Using /lib/modules/2.4.5-SuSE/net/qeth.o /lib/modules/2.4.5-SuSE/net/qeth.o: invalid parameter parm_qeth bash: add_parms,0x10,portname:OSAE: command not found
The portname is like the portname in zOS. - Tim - Matthias Wittpoth <[EMAIL PROTECTED]>@VM.MARIST.EDU> on 26.04.2002 09:05:07 Bitte antworten an Linux on 390 Port <[EMAIL PROTECTED]> Gesendet von: Linux on 390 Port <[EMAIL PROTECTED]> An: [EMAIL PROTECTED] Kopie: Thema: AW: network problems during installation Tim, maybe your problems with the installation routine could be fixed with this workaround: in the installationsystem enter the QETH parameters 0x35a0,0x35a1,0x35a2;add_parms,0x10,portname:OSAE next question "Do you have OSE Express microcode level 0146 or higher?" please answer with "n" There is a fix for the installationsystem available at SuSE. Is the portname ok? Matching with portname in os/390 ? Matthias > -----Urspr�ngliche Nachricht----- > Von: Tim-Chr. Hanschen [SMTP:[EMAIL PROTECTED]] > Gesendet am: Freitag, 26. April 2002 07:33 > An: [EMAIL PROTECTED] > Betreff: network problems during installation > > Hi folks, > > I have a problem when installing SLES7. The installation routine cannot > connect to our network, when selecting Gigabit Ethernet at the beginning > of > the installation, so I tried to install without network. > > I am afraid that I have to setup the network manually. First of all I > tried > to load the qdio: > > SuSE:/ # insmod qdio > Using /lib/modules/2.4.5-SuSE/misc/qdio.o > qdio: loading QDIO base support ($Revision: 1.40 $/$Revision: 1.22 $) > debug: reserved 1 areas of 4 pages for debugging qdio_setup > debug: qdio_setup: new level 2 > debug: reserved 2 areas of 4 pages for debugging qdio_labs > debug: qdio_labs: new level 2 > debug: reserved 1 areas of 2 pages foer debugging qdio_sense > debug: qdio_sense: new level 2 > debug: reserved 2 areas of 4 pages for debugging qdio_trace > debug: qdio_trace: new level 2 > > It seems that the driver has been loaded. After that I tried to load the > qeth modul: > > SuSE:/# insmod qeth > qeth_options=noautop,0x35a0,0x35a1,0x35a2,portname:OSAE > Using /lib/modules/2.4.5-SuSE/net/qeth.o > /lib/modules/2.4.5-SuSE/net/qeth.o: invalid parameter parm_qeth > > What is the problem? I installed the first SuSE GA months ago and as far > as > I remember it worked that way. > > TIA, > - Tim -
