I am still trying to install REDHAT 7.2 in an s390 partition. I was getting
the message
building bootmap: > /boot/bootmap adding Kernel Image:
/boot/vmlinuz-2.4.9-17-tape located at > 0x00010000 Error: could not
retrieve info for target /boot/vmlinuz > 2.4.9-17-tape.
I tried updating the zipl.conf file and changed the 2.4.9-17-tape to
2.4.9-17tape and rerun zipl. I ipled from the dasd and successfully brought
up RedHat Linux, however, I could not telnet to it or ping it. I could only
get to it through the s390 HMC. I decided maybe it was because my zipl.conf
file only contained parameters="root=/dev/dasda1 dasd=2218,2118" so I
changed it again to include chandev=noauto;lcs0,0x1E04,0x1E05,0,2 as well. I
ran zipl again and I ipled again and RedHat Linux came up successfully, but
I kept getting an invalid password. So this time I could not log on from
the HMC console nor could I ping or telnet to it. It may be that the parms
are incorrect, but I am having difficulty know what values to enter for
them.
Any ideas why the telnet does not work would be helpful, or where I can find
exactly what the parameters mean and how to enter them in the zipl.conf file
would be helpful
Ila Z. Miller
___________________________________________________________
___________________________________________________________
Information Systems
University of Iowa Hospitals & Clinics
[EMAIL PROTECTED]
Phone: 319.356.0067
FAX: 319.356.3521
Notice: This e-mail (including attachments) is covered by
the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521, is
confidential and may be legally privileged. If you are not the intended
recipient, you are hereby notified that any retention, dissemination,
distribution, or copying of this communication is strictly prohibited.
Please reply to the sender that you have received the message in error, then
delete it. Thank you.
