Thanks to Rod and Mark.
This fixed my problem. The entire lab uses MTU=1500, when I changed to
1492, everything worked fine. So in the case of a multiprise 3000, there
must be an MTU mismatch to get anywhere. Good grief!
Forgive me if this has been mentioned here before. I ran into one other
problem installing RedHat in an LPAR. zipl fails because the kernel image
it references includes a hyphen, the kernel file /boot does not. Change
one or the other and it works fine.
Thank you,
Chris
Christopher P. Gombola
Advisory I/T Specialist
IBM, Inc.
6710 Rockledge Dr.
Bethesda, MD 20817
Ph: 301-803-3832, t/l 262
Rod
Nash/Australia/IB To: Christopher
Gombola/Bethesda/IBM@IBMUS
M@IBMAU cc:
Subject: RH on MP3000
06/04/2002 01:15
AM
Hi Chris,
Check the MTU size you are using, for a MP3000 it must be 1492 anything
else and you will get what you are seeing. This is documented but I can
not find where at the moment!!! It is generally stated in the 7060 PSP
bucket but I have also seen it in a Linux document.
Rod Nash
Senior IT Specialist
Linux on zSeries
Asia Pacific
IBM Australia
60 City Road, Southbank,
Victoria, Australia, 3006
Office +61-3-9626 6587 Mobile 041 221 4292
Internet - [EMAIL PROTECTED]
